Loading ...
Loading ...
Loading ...
Installation
For The Electrician
This is a cord-connected unit, and must be on a
separate single phase power supply. Check the
nameplate for the correct voltage. The maximum
fuse size for this circuit should be 15 amps, per the
nameplate use fuses, or HACR circuit breakers.
Follow All Local Codes - THIS UNIT MUST BE
GROUNDED. Do not use extension cords and do
not disable or by-pass ground plug on electrical
plug.
After Utility Connections:
1. Level the cabinet, use the leg levelers on the
end of the legs to adjust the cabinet height. (Legs
should have been installed when the unit was
unpacked).
2. Wash the bin and hood. If desired, the interior of
the bin could be sanitized.
3. Locate the scoop, wash it and have it available
for use when needed.
Final Check List
1. Is the ice maker cabinet in a room where
ambient temperatures are within the minimum and
maximum temperatures specified?
2. Has the water supply been connected?
3. Is the water pressure adequate?
4. Have the water connections been checked for
water leaks?
5. Have the drain connections been made?
6. Have the drain connections been checked for
leaks?
7. Is the cabinet level?
8. Is the ice machine plugged into an electrical
power supply of the correct voltage and is the ice
machine the only load on that circuit?
9. Has all of the shipping material been removed
from the inside of the cabinet?
10. Has the bin and cabinet been wiped clean and
sanitized?
11. Has the Customer Evaluation & Warranty
Registration form been filled out? Check for correct
model and serial numbers from the nameplate,
then mail the completed form to Scotsman.
12. Has the owner/user been given the name and
telephone number of the authorized Scotsman
Service Agency serving that location?
AFE400
February 2009
Page 6
Loading ...
Loading ...
Loading ...