Loading ...
Loading ...
Loading ...
en Troubleshooting
42
Fault Cause and troubleshooting
The swivel arm cannot
be opened or closed
because the tool is
jammed in the bowl.
Drive is not in the parked position after a safety sys-
tem has stopped processing or the power supply has
been interrupted.
1. Set the rotary switch to .
2. Eliminate the problem that caused the appliance to
stop.
→"Safety systems", Page36
3. When the swivel arm is open, remove the tool and
close the swivel arm.
4. Set the rotary switch briefly to and then back to
.
a The drive remains on for a short time until the
parked position is reached.
Loading ...
Loading ...
Loading ...