Loading ...
Loading ...
Loading ...
Cleaning and servicing en
39
5. Set the rotary switch to the re-
quired speed.
→Fig.
16
6. Process the ingredients until you
achieve the required result.
7. Set the rotary switch to .
→Fig.
17
Wait until the appliance stops.
8. Unplug the mains plug.
Tips
¡ You can change the speed at any
time during processing or interrupt
processing.
¡ Clean all parts immediately after
use so that residues do not dry on.
Adding more ingredients
1. To add ingredients during pro-
cessing, use the filling shaft in the
lid.
→Fig.
18
2. To add large quantities, set the
rotary switch to .
Wait until the appliance stops.
3. Remove the bowl lid.
→"Removing bowl lid", Page38
4. Add the ingredients to the bowl.
5. Attach the bowl lid.
→"Attaching bowl lid", Page37
6. Process the ingredients until you
achieve the required result.
Using instantaneous switching
1. Set the rotary switch to and
hold.
→Fig.
19
a The ingredients are processed at
maximum speed.
2. Release the rotary switch.
→Fig.
20
a The rotary switch springs to .
a Processing stops and the drives
move to the parked position.
Tip
Instantaneous switching is especially
suitable when using the following
accessories:
¡ Glass blender attachment
¡ Multi-chopper set
¡ Multi-blender attachment
7.10 Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
1. Press down the protective cover
for drive2 at the marking and
remove.
→Fig.
21
2. Pull up the protective cover for
drive3 and remove.
→Fig.
22
Fitting drive cover
1. Align the protective cover for the
drive2 with the marking to-
wards the back, position and press
in place firmly.
→Fig.
23
2. Position the protective cover for
the drive3 and press in place
firmly.
→Fig.
24
Markings and must match
up.
Note:Always close unused drives
with the protective covers.
Cleaning and servicing
8 Cleaning and servicing
Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Loading ...
Loading ...
Loading ...