T2
T1
T1
T2
T2
T1
From Breaker Box
T1
T2
T1
D
E
C
F
B
In from Line Switch
Out to Light (Load)
AA
T2
CC
BB
DD
JUMPER
T1
LOAD
A
T2
JUMPER
GROUND
OR
OR
IMPORTANT!
3-way switches can be wired in different ways. These instructions explain
the most common method. If you have difficulty with the instructions or
your home wiring, contact a licensed electrician for assistance.
1. Shut off power to the circuit at circuit breaker or fuse box.
IMPORTANT! Verify power is OFF to switch box before continuing.
2. Remove both wallplates.
3. Remove the switch mounting screws.
4. Carefully remove the switch from each switch box location. DO NOT disconnect the wires yet.
5. Identify switch connected to fuse box. This is the “line switch.”
Label wire connected to common terminal “LINE.”
6. Identify switch connected to lighting/fixture. This is the “load switch.”
Label wire connected to common terminal “LOAD.”
Observe important wiring information
IMPORTANT: This add-on switch is rated for and intended to only be used with copper wire.
Wire gauge requirements
Use 14AWG or larger wires suitable for at least 80° C for supplying line (hot), load, neutral, ground
and traveler connections.
Wire strip length
1. For attachment using the enclosure’s holes, strip insulation 5/8in. (16mm).
UL specifies the tightening torque for the screws is 14Kgf-cm (12lbf-in).
Switch connected to fuse box “line switch”
(Replacing standard switch with GE-branded primary switch)
1. Disconnect all wires on existing switch.
2. Locate neutral wires found inside switch box. These are typically a bundle of
white wires in the back of the box. Remove wire nut securing them (A).
3. Locate jumper wire included in packaging of primary switch.
Connect with neutral wires and secure with wire nut (A).
4. Connect opposite end of jumper wire to NEUTRAL terminal on primary switch (B).
5. Connect wire labeled “LINE” to LINE terminal on primary switch (C).
6. Connect ground wire (bare copper/green) to GROUND terminal on primary switch (D).
7. Connect one of the two remaining wires (T1) to LOAD terminal on primary switch (E).
Write down the color of the wire. You will need this when installing the add-on switch.
8. Connect the remaining wire (T2) to TRAVELER terminal on the primary switch (F).
Switch connected to lighting “load switch”
(replacing standard switch with GE-branded Add-on Switch)
1. Disconnect all wires on existing switch.
2. Locate neutral wires found inside switch box. These are typically a bundle of
white wires in the back of the box. Remove wire nut securing them (AA).
3. Locate jumper wire included in packaging of add-on switch.
Connect with neutral wires and secure with wire nut (AA).
4. Connect opposite end of jumper wire to NEUTRAL terminal on add-on switch (BB).
5. Connect ground wire (bare copper/green) to GROUND terminal on add-on switch (CC).
6. Locate the same colored wire you noted in the switch box (T1). Using
a wire nut, secure it only to the wire you labeled “LOAD.”
7. Connect the remaining wire to TRAVELER terminal on the add-on switch (DD). This is
the same color as the wire connected to TRAVELER terminal on the primary switch.
Attach switch to box
1. Place both switches into their respective switch boxes, being careful not to pinch or
crush wires.
2. Secure each switch to the box using the supplied screws.
3. Mount each wallplate.
4. Reapply power to the circuit at fuse box or circuit breaker and test the system.
SPECIFICATIONS
AS2005
Power: 120/277VAC, 60Hz
Operating temperature range: 32-104° F (0-40° C)
Type 1 action
For indoor use only
Specifications subject to change without notice due to continuing product improvement
SPÉCIFICATIONS
AS2005
Tension : 120/277VCA, 60Hz
Plage de températures de fonctionnement : de 32 à 104° F (de 0 à 40° C)
Intervention de type 1
Utilisation intérieure uniquement
En raison d’améliorations continues du produit, les spécifications peuvent faire l’objet de changements
sans préavis
ESPECIFICACIONES
AS2005
Alimentación: 120/277VAC, 60Hz
Rango de temperatura de funcionamiento: 32-104° F (0-40° C)
Acción de tipo 1
Para espacios interiores solamente
Especificaciones sujetas a cambio sin aviso debido a continuas mejoras del producto
IMPORTANT!
The Add-on switch is not wireless enabled and must be used exclusively with one of
the GE-branded wireless devices. It is not designed for stand-alone use to control an
electrical load. It does not have wireless functionality and does not act as a repeater in
your wireless control network
IMPORTANT!
L’interrupteur supplémentaire n’est pas sans fil et doit être utilisé exclusivement avec
l’un des dispositifs sans fil GE. Il n’est pas conçu pour être utilisé de façon autonome en
vue de commander une charge électrique. Il n’est pas équipé de la fonction sans fil et il
ne joue pas le rôle de répétiteur dans votre réseau de commande sans fil.
¡IMPORTANTE!
El interruptor auxiliar no tiene funcionalidad inalámbrica y se debe utilizar únicamente
con uno de los dispositivos inalámbricos GE. No ha sido diseñado para usarse
de manera separada para controlar una carga eléctrica. No tiene funcionalidad
inalámbrica y no funciona como repetidor en una red de control inalámbrico.
A. Rocker paddle - The add-on switch
takes the characteristics of the
primary switch. Refer to the primary
switch’s manual for instructions.
CC. Ground (Green/Bare)
DD. Traveler (Red/Other)
BB. Neutral (White)
WARNING — SHOCK HAZARD
Turn OFF the power to the branch circuit for the switch and lighting fixture at the service
panel. All wiring connections must be made with the POWER OFF to avoid personal injury
and/or damage to the switch.
This device is intended for installation in accordance with the National Electric Code and
local regulations in the United States or the Canadian Electrical Code and local regulations
in Canada. If you are unsure or uncomfortable about performing this installation, consult a
qualified electrician.
3.
2.
Out to Load Switch
Line Switch
(Primary Switch)
LINE
NEUTRALS
NEUTRALS
LINE
All brand names shown are trademarks
of their respective owners.
Tous les noms de marque illustrés sont des marques
de commerce de leurs propriétaires respectifs.
Todas las marcas que aparecen aquí son marcas
registradas de sus respectivos dueños.
MADE IN CHINA/FABRIQUÉ EN CHINE/HECHO EN CHINA
GE IS A TRADEMARK OF GENERAL ELECTRIC COMPANY AND
IS UNDER LICENSE BY JASCO PRODUCTS COMPANY LLC,
10 E. MEMORIAL RD., OKLAHOMA CITY, OK 73114.
©JASCO 2019 | 46199 | 47186 | 47187 | 47188 | 47333 |
47334 | AS2005 | 06/17/19 v2
If you have any problems or questions, contact our U.S.-based Consumer Care at
1-800-654-8483, option 1, Monday–Friday, 7AM–8PM CST.
For the most up-to-date product support, accessories, electronic (PDF)
format manuals and more, visit www.byjasco.com/support.
• No user serviceable parts in this unit.
Si vous avez des problèmes ou des questions, veuillez communiquer avec notre
service à la clientèle aux États-Unis au 1-800-654-8483, option 1, du lundi au
vendredi, de 7 h à 20 h (HNC).
Pour le soutien relatif aux produits le plus à jour, les accessoires, les manuels en
format électronique (PDF) et plus encore, visitez le site www.byjasco.com/support.
• Aucune des pièces de ce dispositif ne peut être réparée par l’utilisateur.
Si tiene problemas o dudas, comuníquese con nuestro Centro de
atención al cliente con sede en EE. UU. al 1-800-654-8483, opción 1 de
lunes a viernes, de 7 a.m. a 8 p.m., hora estándar del centro (CST).
Para recibir el soporte técnico más actualizado sobre productos, accesorios,
manuales en formato digital (PDF), entre otros, visite www.byjasco.com/support.
• Esta unidad no contiene piezas que el usuario pueda reparar.
DO NOT RETURN THIS
PRODUCT TO THE STORE
NE RETOURNEZ PAS
CE PRODUIT AU MAGASIN
NO DEVUELVA ESTE
PRODUCTO A LA TIENDA
STOP
NOT FOR USE WITH MEDICAL OR
LIFE-SUPPORT EQUIPMENT
ENABLED DEVICES SHOULD NEVER BE USED TO
SUPPLY POWER TO OR CONTROL THE ON/OFF STATUS
OF MEDICAL OR LIFE-SUPPORT EQUIPMENT.
NE PAS UTILISER AVEC UN ÉQUIPEMENT
MÉDICAL OU DE SURVIE
LES DISPOSITIFS COMPATIBLES AVEC LA TECHNOLOGIE
NE DEVRAIENT JAMAIS ÊTRE UTILISÉS POUR ALIMENTER
OU COMMANDER LA MISE EN MARCHE OU L’ARRÊT
DE L’ÉQUIPEMENT MÉDICAL OU DE SURVIE.
SE PROHÍBE SU EMPLEO EN EQUIPO MÉDICO
O EQUIPO PARA EL MANTENIMIENTO
DE LAS FUNCIONES VITALES
LOS DISPOSITIVOS NUNCA SE DEBEN USAR PARA
SUMINISTRAR ENERGÍA ELÉCTRICA AL EQUIPO
MÉDICO O AL EQUIPO PARA EL MANTENIMIENTO DE
FUNCIONES VITALES, NI PARA CONTROLAR EL ESTADO
DE ENCENDIDO O APAGADO DE DICHOS EQUIPOS.
WARRANTY
Jasco Products Company warrants this product to be free from manufacturing defects for two years
from the original date of consumer purchase. This warranty is limited to the repair or replacement of
this product only and does not extend to consequential or incidental damage to other products that
may be used with this product. This warranty is in lieu of all other warranties, expressed or implied.
Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or
limitation of incidental or consequential damage, so the above limitations may not apply to you. This
warranty gives you specific rights, and you may also have other rights which vary from state to state.
Please contact our U.S.-based Consumer Care at 1-800-654-8483 (option 1) between 7AM – 8PM CST
or www.byjasco.com if the unit should prove defective within the warranty period.
GARANTIE
Jasco Products Company garantit que ce produit est exempt de tout défaut de fabrication pour
une période de deux ans à compter de la date de l’achat original par l’acheteur. Cette garantie se
limite exclusivement à la réparation ou au remplacement de ce produit et n’est pas applicable aux
dommages indirects ou accessoires survenus sur d’autres produits utilisés avec ce produit. Cette
garantie se substitue à toute autre garantie expresse ou implicite. Certains États ne permettent pas
de restrictions quant à la durée d’une garantie implicite ou permettent l’exclusion ou la limitation des
dommages indirects et accessoires; il se peut, par conséquent, que cette garantie ne s’applique pas
dans votre cas. Cette garantie vous confère des droits juridiques précis; vous pouvez jouir d’autres
droits qui peuvent varier d’un État à l’autre. Veuillez communiquer avec notre service à la clientèle
aux États-Unis au 1-800-654-8483 (option 1) entre 7 h et 20 h (heure normale du Centre) ou par
l’intermédiaire de notre site web www.byjasco.com si l’appareil s’avère défaillant au cours de la
période de garantie.
GARANTÍA
Jasco Products Company garantiza que este producto está libre de defectos de fabricación
durante un periodo de dos años a partir de la fecha original de compra por parte del consumidor.
Esta garantía se limita a la reparación o sustitución de este producto solamente y no se extiende
a daños derivados o accidentales causados a otros productos que se usen con esta unidad. Esa
garantía remplaza a todas las demás garantías expresas o implícitas. Algunos estados no autorizan
limitaciones en cuanto a la duración de una garantía implícita ni permiten la exclusión o limitación
por daños accidentales o derivados; por lo tanto, puede que las anteriores limitaciones no apliquen
en su caso. Esta garantía le da a usted derechos específicos, y otros que usted puede tener y que
varían según el estado en el que usted reside. Si la unidad resultare defectuosa dentro del periodo
de garantía, Por favor, comuníquese con nuestro Centro de atención al cliente con sede en EE. UU. al
1-800-654-8483 (opción 1) entre 7 y 20 h, Hora del Centro, o a través de nuestro sitio de internet www.
byjasco.com.
Jasco Products Company LLC, Building B
10 E. Memorial Rd. Oklahoma City, OK 73114.
Tools you will need
GE-branded Switch
Standard 3-Way Switch
1.
1.
To change color of the paddle
This step is optional. Before installation, you may want to change
the color of the paddle to match your wallplate or décor.
1. Push side tabs in on one side and then the other to
release paddle. Lift the cover up and off.
2. Simply put the new paddle onto the switch by side tabs and
snap securely into place.
Once this step has been completed, please proceed to section 3.
COMMON COMMON
GROUND
Line
Switch
Load
Switch
OR
OR
Out to Light (Load)
Out to Load Switch
In from Line Switch
From Breaker Box
GROUND
LOAD
MANUAL • MANUEL • MANUAL
In-Wall
Smart Dimmers
Plug-in
Smart Dimmers
In-Wall
Add-on Switches
Purchase additional items at
EZzwave.com, EZzigbee.com or visit your local retailer.
In-Wall Motion
Switch or Dimmer
Plug-in
Smart Switches
In-Wall
Smart Switches
Enbrighten
Smart LED Bulb
In-Wall
Smart Fan Control
Hinge Pin
Smart Door Sensor
Direct Wire,
40A Outdoor
Smart Switch
Portable
Smart Multi
Sensor
In-Wall
Tamper-Resistant
Smart Outlet
Plug-in
Outdoor Smart
Switch
46199
47186
47187
47188
47333
47334
AS2005
In-Wall
Add-on Switch
Montage mural Interrupteur
Supplémentaire
Interruptor
auxiliar de pared
Control lighting from up to five switches.*
Smart control Add-on switches
*For a list of compatible devices, visit ezzwave.com
To purchase an add-on switch or for more details,
visit ezaddonswitch.com.
Multiple paddle
colors available
ezzwave.com/paddlecolors
A
CC
Load Switch
(Add-on Switch)
Insert wires into holes, do not wrap wires
around screws.
Do not remove screws.
RIESGO DE INCENDIO
RIESGO DE DESCARGA ELÉCTRICA
RIESGO DE QUEMADURAS
CONTROL DE EQUIPOS ELECTRODOMÉSTICOS
PRECAUCIÓN
• NO SUPERE LOS VALORES NOMINALES ELÉCTRICOS
• NO USAR PARA CONTROLAR DISPOSITIVOS EN LOS
QUE EL FUNCIONAMIENTO NO INTENCIONADO PODRÍA
PROVOCAR SITUACIONES PELIGROSAS (LÁMPARAS DE
CALEFACCIÓN, LÁMPARAS SOLARES, ETC.)
• NO UTILICE PARA CONTROLAR TOMACORRIENTES.
• USE SOLAMENTE EN INTERIORES
RISK OF FIRE
RISK OF ELECTRICAL SHOCK
RISK OF BURNS
CONTROLLING APPLIANCES
CAUTION:
• DO NOT EXCEED RATINGS
• DO NOT USE TO CONTROL ANY DEVICE WHERE
UNINTENDED OPERATION COULD CAUSE UNSAFE
CONDITIONS (HEAT LAMP, SUN LAMP, ETC.)
• DO NOT USE TO CONTROL RECEPTACLES
• FOR INDOOR USE ONLY
RISQUE D’INCENDIE
RISQUE DE CHOC ÉLECTRIQUE
RISQUE DE BRÛLURES
COMMANDE DES APPAREILS
ATTENTION:
• NE PAS DÉPASSER LES CARACTÉRISTIQUES NOMINALES
• NE PAS UTILISER POUR COMMANDER DES APPAREILS
POUR LESQUELS UN FONCTIONNEMENT IMPRÉVU
POURRAIT ENTRAÎNER DES CONDITIONS DANGEREUSES
(LAMPE À RAYONS INFRAROUGES, LAMPE SOLAIRE, ETC.)
• NE PAS UTILISER POUR COMMANDER LES PRISES DE
COURANT
• POUR UTILISATION INTÉRIEURE UNIQUEMENT
AVERTISSEMENT
WARNING ADVERTENCIA
DD
BB
READ IT OR WATCH IT
Read instructions or watch easy-to-follow
video. Scan QR code or visit goo.gl/BypXzF
Loading ...