Loading ...
Loading ...
Loading ...
12
1
2
3
4
!1-B SECURE TO THE CABINETRY ON THE SIDES !2-B OPTIONALLY SECURE TO THE CABINETRY ABOVE
x4
Secure using two pairs
of formed brackets
(use 5⁄8” (16 mm)
screws). Repeat on
the other side of the
chassis.
For further adjustment,
using the most appropriate
length Hexagonal socket
supplied, fully extend
leveling feet up to required
distance by hand.
Ensure product is level and
aligning with cabinetry.
Hexagonal
socket
(x2)
!3-B REFIT THE DRAWER ONTO THE RUNNERS
The top mounting
brackets will only
bend upwards a
maximum of 3/8”
(10 mm).
4” (100 mm)
Pull the release tabs forward on both
sides 4” (100 mm). Ensure the tabs are
fully pulled forward and click into place.
Before refitting the
drawer, ensure the hoses
are not twisted and the
latches at the rear of
each drawer runner are
facing forward.
Lift or rotate counter-clockwise the
drawer back onto the drawer runners
on either side.
Release tab
Loading ...
Loading ...
Loading ...