Loading ...
Loading ...
Loading ...
EDWB14S 60cm Freestanding Dishwasher User Manual Page 39
/
39 / 50
EN
Operating Your Machine
it can change while the program
is running, depending on the
temperature of the room where your
machine is installed, temperature
of the supply water, auto-cleaning
of the water softening system
(regeneration) and amount of the
dishes.
Adding Functions to the
Program
With the help of the add function
buttons, you can run the selected
program together with the Half Load
and Delayed Start functions.
To add a function to the program:
1. Select the program by pressing
program selection button.
2. Press the button of the function
that you want to enable and check
to see a indicator for the relevant
function on the display.
3. You can start the program by
pressing the Start / Pause / Cancel
button.
Program Steps Follow-up
You can follow up the step while current
program is running from the Program
Steps follow up indicator.
a Washing Step Indicator
b Drying Step Indicator
c End of Program Indicator
The display shows the steps for
washing and drying, respectively, while
the selected program is running. Only
the End of Program indicator lights up
when the program is over. Remaining
Time Indicator displays “0:00”.
Canceling a Program
Press Start / Pause / Cancel button
for three seconds to cancel a program
that is already running. Release the
button when symbol start flashing
in the display. For a couple of minutes
the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator (11) displays
“0:00”. You may select and operate a
new program following the program
cancellation process. There might be
residues of detergent or rinse aid left in
the machine and/or on the pieces being
washed depending on the step the
previous program was in at the time of
such cancellation.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start can
not be set after the program starts. The
selected program must not be started in
order to be able to set the delay time.
Delayed start indicator sand glass
will start flashing when the delayed
start button is pressed. You can set the
desired time by pressing the delayed
start button. Press the Start / Pause /
Cancel button after setting the time. The
delayed start indicator sand glass and
play icon will remain lit on the display
during the delayed start countdown
and the delay time indicator will display
the remaining time. Program will start
automatically when the countdown is
over.
Loading ...
Loading ...
Loading ...