Loading ...
Loading ...
Loading ...
EDWB14S 60cm Freestanding Dishwasher User Manual Page 17
/
17 / 50
EN
Preparation
C
While using combined tablet
detergents contact with the
detergent producers if the
dishes are wet and/or if
you notice limescale spots
particularly on glasses after
the washing programme is
over.
C
The best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
When you switch to powder, liquid/gel
or tablet detergent from a combined
tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
C
Depending on the model,
salt indicator and/or rinse aid
indicator must be enabled
again if they were disabled
before.
Rinse aid
C
The rinse aid used in
dishwashers is a special
combination used to increase
drying efficiency and prevent
water or limescale stains on
the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir by pressing its latch (B).
2. Fill the reservoir until “MAX” level.
3. Turn the rinse aid amount adjuster
manually to a position between
1 and 6 (4). If there are stains on
tableware items after washing, level
must be increased and if there is
a blue trace after wiping them by
hand, it must be decreased. This is
set to position 4 as factory default.
4. Close the lid of the reservoir by
pressing on it lightly.
C
Wipe clean any spilled
rinse aid outside the
reservoir. Rinse aid that
spilled accidentally will
cause foaming and it will
eventually decrease washing
performance.
Loading ...
Loading ...
Loading ...