User Manual Rocketfish RF-SPEHP3 Sport Neckband Headphones Black

Documents for Rocketfish RF-SPEHP3

The following documents are available:
User Manual Other Documents Photos
RF-SPEHP3 photo
Écouteur
Embout auriculaire
Sport Neckband Headphones
Écouteurs serre-nuque sport
Auriculares deportivos con banda
de sujeción para la nuca
RF-SPEHP3
QUICK SETUP GUIDE / GUIDE D’INSTALLATION RAPIDE /
GUÍA DE INSTALACIÓN RÁPIDA
We appreciate your purchasing these Rocketsh Sport Neckband
Headphones and hope you really enjoy using them.
Package contents
• Neckband Headphones
Earphone tips 3 pairs provided, including small, medium, and large.
Medium tips come pre-installed)
• Cable clip
Quick Setup Guide
Checking for t
To determine if you have the right size tip:
1 Insert the earphone into your ear.
2 Tilt the earphone back until it is secure.
Choose the tips that t you comfortably and rest securely in your ear.
Changing earphone tips
Select the size of earphone tip that provides you with the best
comfort and t.
1 Gently peel back the edges of the attached earphone tip, using care
not to tear the tip.
2 Position the opening of the new tip over the earphone.
3 Press the base of the earphone tip over the base of the earphone
until the tip feels secured.
Putting on the headphones
Put the headphones on as shown below by wrapping them behind
the head.
For optimum listening, use the supplied earphone tips.
Adjusting the headphones
After placing the headphones behind your head, turn on the
sound and adjust the headphones for comfort and optimum
listening.
Cleaning the headphones
Caution: Improper cleaning can damage the headphones.
Contact with any liquid under pressure, or extended contact with
any liquid, can cause it to seep into the earphone housing,
resulting in damage to the earphone.
Remove the earbud tips from the earphones.
Use a cloth to carefully remove buildup from the earphones and
earphone tips.
Do not use any solvents or cleansing agents.
Do not immerse the earphones into water.
Do not expose the earphones to excessive water pressure.
Allow the earphones and earphone tips to air dry at room
temperature.
SAFETY: Important safety instructions
Listening at high volume levels for long periods of time can lead
to permanent hearing loss.
The earphones contain magnets that generate a magnetic eld
which could cause interference with cardiac pacemakers and
implanted debrillators. Keep the earphones at least 1.2" (3 cm)
from cardiac pacemakers or implanted debrillators.
In order to prevent accidents:
Do not wear the headphones in an environment that requires
your special attention (e.g. in trafc).
Keep the headphones and accessory parts out of reach of
children who could swallow smaller pieces.
In order to prevent damage to the headphones:
Do not heat the headphones (hairdryer, heating, extended
exposure to sunlight, etc.).
Do not store wet headphones in a bag.
One-year limited warranty
Visit www.rocketshproducts.com for details.
Contact Rocketsh:
For customer service, call 1-800-620-2790
www.rocketshproducts.com
© 2011 BBY Solutions, Inc. All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and
brand names are trademarks of their respective owners.
Nous vous remercions de votre achat de ces écouteurs
serre-nuque sport Rocketsh et souhaitons qu’ils vous donnent
entière satisfaction.
Contenu de l’emballage
• Écouteurs serre-nuque
3 paires d’embouts auriculaires fournies (tailles petite, moyenne
et grande). Les embouts moyens sont pré-installés
Agrafe de câbles
Guide d’installation rapide
Quel est l’embout le mieux adapté ?
Pour déterminer le type d’embout le mieux adapté :
1 Insérer l’écouteur dans l’oreille.
2 Incliner l’écouteur vers l’arrière jusqu’à ce quil soit en place.
Choisir l’embout qui est le plus confortable et s’adapte le mieux à
l’oreille.
Pour changer un embout auriculaire
Sélectionner la taille dembout qui ore le meilleur confort.
1 Déplier délicatement les bords de l’écouteur en veillant à ne pas
le déchirer.
2 Positionner l’ouverture du nouvel embout sur l’écouteur.
3 Appuyer sur la base de l’embout auriculaire sur la base de
l’écouteur jusqu’à ce que l’embout soit en place.
Mettre l’écouteur serre-nuque en place
Mettre l’écouteur serre-nuque tel quillustré ci-dessous en le
passant par dessus la tête.
Pour une écoute optimale, utiliser les embouts auriculaires fournis.
Earphone
Earphone tip
Loading ...