Soundcore A3212 Anker Life U2 Bluetooth Neckband Headphones

Product's Documents

Below are documents related to this product, you can read online or download:
A3212 photo

Quick Start Guide

This is the main product document for model A3212.

The file format is pdf, 5 pages, you can download this manual here .

background
Quick Start Guide
Soundcore Life U2
background
01 EN
Charging
Fully dry off the USB port before charging.
To prevent damage, use the provided USB-C cable.
LED indicator
Steady red Being charged
Steady blue Fully charged
Flashing red Low battery
Powering On/Off
Press and hold the multi-function button for 1 second to power on.
Press and hold the multi-function button for 3 seconds to power off.
ON
OFF
ON
OFF
LED indicator
Steady white for 1 second Powered on
Steady red for 1 second Powered off
background
EN 02
Bluetooth Pairing
When powered on, nd “Soundcore Life U2” in the Bluetooth list on your device and
connect.
When powered off, press and hold the multi-function button for 3 seconds until the
LED ashes blue to enter the Bluetooth pairing mode.
ON
Soundcore
Life U2
1m
LED indicator
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
Multi-point Pairing Mode
When successfully connected with the first device, press and hold the volume up
button and volume down button simultaneously for 3 seconds to pair with another
device.
Soundcore
Life U2
Soundcore
Life U2
3”
2/2
1/2
background
03 EN
Soundcore Life U2 can only play music on one mobile device at a time.
Each time you power your Soundcore Life U2, it will automatically connect
to your last successfully connected device if available.
Button Controls
Play / Pause Press
Next track Press and hold for 1 second
Previous track Press and hold for 1 second
Volume up / down / Press
BassUp™ (Dual Equalizer)
Press and hold for 1 second
simultaneously
Answer / End a call
Press
Put the current call on hold and answer a new
incoming call
Reject a call
Press and hold for 1
second
Switch between held call and active call
Activate Siri or other voice assistant software Press twice
Wearing
Choose the EarTips and EarWings that t your ears best.
background
EN 04
1
2
Reset
1. Make sure the headphone is powered off and being charged.
2. Press and hold the multi-function button and volume up button simultaneously for
5 seconds until the LED indicator ashes red twice.
All the memory data will be cleared.
Specifications
Specications are subject to change without notice.
Input 5 V 0.5 mA
Charging time 2 hours
Playtime (varies by volume level and content) 24 hours
Driver size 10 mm × 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Waterproof level IPX7
Bluetooth version V5.0
Bluetooth range 10 m / 33 ft
「スウェットガード」はカナルワークス株式会社の登録商標です。

Specifications

Soundcore A3212 Questions and Answers

See other models: Q20+ LDAC ACAA IP68 Life Q30