Loading ...
Loading ...
Loading ...
CAUTION
Installation
If the refrigerant gas leaks during the
installation, ventilate the area immediately.
• Such leakage it can be harmful for your
health.
Always check for gas (refrigerant) leakage
after installation or repair of product.
• Low refrigerant levels may cause product
failure.
Keep the product level, even when installing it.
• This will help to avoid vibration or water
leakage.
Use two or more people to lift and transport
the product.
• This will help to avoid personal injury.
Installation work must be performed in
accordance with the National Electric Code by
qualified and authorized personnel only.
Do not place objects in direct proximity of
the outside unit. Do not let leaves and other
debris accumulate around the unit. Leaves are
a hotbed for small animals, which can enter
the unit. Once inside the unit, these animals
can lead to the unit malfunctioning, and end
up causing in smoke or fire when they make
contact with electrical parts.
• There is a risk of fire or electric shock.
Do not install the product where it will be
exposed to sea wind (salt spray) directly.
• This can cause corrosion on the product.
Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.
Make sure that the drainpipe is installed
properly to drain water. Arrange the drain hose
to ensure smooth drainage.
• Incomplete drainage may lead to water
damage done to the building, furniture, etc.
If no water is discharged from the drainpipe
while the air conditioner or heat pump is in
the cooling mode, it may be because the
drainpipe has become clogged with dust
or dirt, and could result in water leakage
in the indoor unit. In such a situation, stop
operating the air conditioner or heat pump
and contact an Authorized Service Center.
Do not install the product where the noise or
hot air from the outdoor unit could be harmful
to your immediate surroundings.
• Improper placement could cause problems
for your neighbors.
Operation
If refrigerant gas leaks while the unit is being
repaired do not touch the leakaing refrigerant
gas.
• The refrigernat gas can cause frostbite (cold
burn)
Do not mix air or gases other than the
specified refrigerant used in the system.
• Air entering the refrigerant system can
lead to excessively high pressure causing
equipment damage or injury.
Make sure that there are no obstacles close
to the outdoor unit. The presence of obstacles
close to the outdoor unit may reduce the
performance of outdoor unit or increase its
operating sound.
• This could cause product failure.
Do not use the air conditioner for any other
purposes other than comfort cooling or
heating. Do not use the unit for cooling
precision instruments, food, plants, animals or
works of art.
• Doing so could lead to risk of damage or
loss of property.
Replace all the batteries in the remote control
with new ones of the same type. Do not mix
old and new batteries or different types of
batteries.
• Doing so could lead to a risk of fire or
explosion.
Do not recharge or disassemble the batteries.
Do not dispose of batteries in a fire.
• They may burn or explode.
If the liquid from the batteries gets onto your
skin or clothes, wash it well with clean water.
Do not use the remote if the batteries have
leaked.
• The chemicals in batteries could cause
burns or other health hazards.
SAFETY INSTRUCTIONS
6
Loading ...
Loading ...
Loading ...