Loading ...
Loading ...
Loading ...
Wireless Remote Controller
NOTE
• Depending on the product type, some functions may not be available and displayed.
• Some products don’t receive the wired signals.
• When using the simultaneous operation system, the system will operate approximately 1-2 minutes after
pressing the remote controller button.
• The displayed temperature can be different from the actual room temperature if the remote controller is
installed somewhere exposed to direct sunlight or is nearby a heat source.
• Depending on the product, wireless and wired remote control are optional or basic.
• Operation Modes : Cooling Mode → Auto Operation → Dehumidification Mode → Heating Mode → Fan Mode.
• Heating Mode is not available for Cooling-only Models.
Button DisplayButton Description
-
Used to turn on/off the unit.
-
Used to set each vane angle.
Used to start or stop the plasma-purification
function.
Used to select the room temperature.
JET COOL
-
Used to select the operation mode.
Jet Cooling sets the fan to operate at a super high speed.
Used to set the fan speed at one of four speeds:
low, medium, high and chaos
Used to set the desired left/right (horizontal)
airflow direction.
-
Used to select the room temperature.
SLEEP Used to set the time for the sleep function.
ON
-
Used to set the start time.
OFF -
-
SET / CLEAR
-
Used to set/clear the timer.
Used to set the current time (hold button for 3 seconds)
FUNC.
Used to set or clear Auto Clean, Smart Clean,
Electric heater or Individual vane angle control.
VANE ANGLE
PLASMA
MODE -
FAN SPEED
-
Used to stop or start louver movement and set
the desired up/down airflow direction.
ROOM TEMP
Used to set the stop time.
Used to set the timer.
Used to adjust the brightness.
(If it is not time adjust mode)
-
-
-
-
-
OPERATION
10
Loading ...
Loading ...
Loading ...