Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 57
(Continued)
Recirculation can be used when outside
conditions such as smoke, odors, dust, or high
humidity are present. Recirculation can be used
in all modes except for Defrost. Recirculation
may be unavailable (button on the touchscreen
greyed out) if conditions exist that could create
fogging on the inside of the windshield. The A/C
can be deselected manually without disturbing
the mode control selection. Continuous use of
the Recirculation mode may make the inside air
stuffy and window fogging may occur. Extended
use of this mode is not recommended.
Front Defrost Button
Press and release the Front Defrost
button on the touchscreen, or push
and release the button on the
faceplate, to change the current
airflow setting to Defrost mode. The Front
Defrost indicator illuminates when Front
Defrost is on. Air comes from the windshield
and side window demist outlets. When the
defrost button is selected, the blower level may
increase. Use Defrost mode with maximum
temperature settings for best windshield and
side window defrosting and defogging.
When toggling the front defrost mode button,
the climate system will return to the previous
setting.
Rear Defrost Button
Press and release the Rear Defrost
button on the touchscreen, or push
and release the button on the
faceplate, to turn on the rear window
defroster and the heated outside mirrors (if
equipped). The Rear Defrost indicator
illuminates when the rear window defroster is
on. The rear window defroster automatically
turns off after 10 minutes.
Driver And Passenger Temperature
Control Buttons
These buttons provide the driver and passenger
with independent temperature control.
Push the red button on the faceplate
or touchscreen or press and slide the
temperature bar towards the red
arrow button on the touchscreen for
warmer temperature settings.
Push the blue button on the faceplate
or touchscreen or press and slide the
temperature bar towards the blue
arrow button on the touchscreen for
cooler temperature settings.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild
washing solution, wiping parallel to the
heating elements. Labels can be peeled off
after soaking with warm water.
Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
Keep all objects a safe distance from the
window.
CAUTION! (Continued)
2
21_LD_OM_EN_USC_t.book Page 57
Loading ...
Loading ...
Loading ...