1. Home
  2. Philips
  3. Philips BDL4645E/27 User Manual
  4. Page 26

User Manual - Page 26

For BDL4645E/27.

Loading ...
Loading ...
Loading ...
BDL3245E / BDL4245E / BDL4645E
18
Language
SelectthelanguageusedintheOSDmenu.
Theoptionsare:{ }/{ }/{ }
/{ }
/
{ }/
{ }/{ }/
{ }/{ }.
Panel saving
Choosetoenablethepanelsavingfunctionstoreducetheriskofthe
“image persistence”.
• {Cooling Fan}-Select{On}toturnonthecoolingfanallthe
time.Select{Auto}toturnon/offthecoolingfanaccordingtothe
monitortemperature.
NOTE: Thespeedofthecoolingfanispre-setto{low},{mid},or
{high}speedeachat50°C,58°C,or63°Crespectively.The
monitorwillautomaticallyshutdownbyreachingapreset
criticaltemperatureof82°C.
• {Brightness}-Select{On}andthebrightnessoftheimagewillbe
reducedtoanappropriatelevel,andtheBrightnesssettinginthe
Picturemenuwillbecomeunavailable.
• {Pixel shift}-Selectthetimeinterval({Auto}/{10~900}Seconds
/{Off})forthemonitortoslightlyexpandtheimagesizeandshift
thepositionofpixelsinfourdirections(up,down,left,orright).
Network control port
Selectthenectworkcontrolport.
Theoptionsare:{RJ-45}/{RS-232}.
Network settings
Assign{IP},{Subnet Mask},and{Default gateway}forthedisplay.
Network settings
Network host name
DHCP
IP address
Subnet mask
Default gateway
Login user name
Login password
0
0
0
0
0
0
-
-
-
a d m i n
0
[ SET ]
change [SET] in STORE
0
Disable
0
0
0
0
0
-
-
-
0
0
0
0
0
0
0
0
0
-
-
-
• DHCP-ChoosetoenableordisabletheDHCPfunction.Ifenabled,
thedisplaywillbeassignedIPaddress,SubnetmaskandDefault
gatewayautomatically.Ifdisabled,youwillbepromptedtoenterthe
followingvaluemanually.Finally,press[SET]buttontostoreandsave
thechosenvalues.
• IPaddress
• Subnetmask
• Defaultgateway
• Loginusername
• Loginpassword
Conguration reset
ResetallsettingsintheConguration1menu.
Factory reset
ResetallthesettingsintheOSDmenusof{Picture},{Screen},{Audio},
{PIP},{Conguration1},{Conguration2},and{Advanced option}.
Press[ ]or[ ]buttontoselect[Reset],andthenpress[SET]button
todothereset.
Factory reset
Cancel
Reset
4.2.6. Configuration2 menu
OSD turn off
Information OSD
Off timer
OSD H-position
Monitor information
Picture
Screen
Audio
PIP
Configuration1
Configuration2
Advanced option
OSD V-position
OSD turn off
SettheperiodoftimetheOSDmenustaysonthescreen.
Theoptionsare:{5 ~ 120}seconds.
Information OSD
SettheperiodoftimetheinformationOSDdisplayedontheupper
rightcornerofthescreen.TheinformationOSDwilldisplaywheninput
signalischanged.
TheinformationOSDwillremainonthescreenwith{Off}selection.
Theoptionsare:{1 ~ 60}seconds.
Off Timer
Setthemonitortoturnitselfofftostandbymodewithinanamountof
timespecied.
Theoptionsare:{Off,1 ~ 24}hours.
NOTE: Whenthe“Offtimer”isactivated,the“Schedule”settingswill
bedisabled.
OSD H-position
AdjustthehorizontalpositionoftheOSDmenu.
OSD V-position
AdjusttheverticalpositionoftheOSDmenu.
Monitor Information
Displaystheinformationaboutyourmonitor,includingmodelnumber,
serialnumber,operatinghoursandsoftwareversion.
Monitor information
Model name:
Serial:
Operation Hours:
Sw Version:
BDL3245E
VER 0.203
0 H 3M
Loading ...
Loading ...
Loading ...