Loading ...
Loading ...
Loading ...
1312
Care and maintenance
We recommend routine cleaning in order to keep your unit in top condition.
When changing lters
1. Wipe clean the underside of the lid after removal.
2. Vacuum the air inlet grille from the inside using a soft brush and/or other suitable attachment.
3. Vacuum the small air inlets with a soft brush attachment.
General
1. Wipe the exterior of the unit with a soft, clean, damp cloth.
2. Never clean with gasoline, chemical solvents or corrosive material as these agents may damage
the surface.
3. Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause elec-
tric shock or damage the unit.
4. Do not try to repair or adjust any of the electrical or mechanical functions on your Blueair unit
yourself. Contact your local dealer or Blueair for warranty information.
Help and support
If you have questions about Blueair Classic series, please visit www.blueair.com or contact your
local Blueair retailer.
Warranty information
The Blueair Limited Warranty applies only if the unit is used according to the instructions in this
manual.
Classic 680i/605 technical specications*
CADR (cfm)**:
Room size 775 sq.ft. (72 m
2
)
Air Changes per Hour *** 5
Airow (Speed 1-2-3) 150-275-650 cfm
Size (HxWxD): 26 x 20 x 13 in. (660 x 500 x 340 mm)
Product weight: 35 lbs (16 kg)
Energy consumption
(Speed 1-2-3)****
15-65-100 W
Sound pressure levels (Speed 1-2-3) 33-44-62 dB(A)
Filter replacement indicator Yes
Speed control options 1-2-3, non-touch, smartphone (Automode)
1-2-3, non-touch, smartphone
Air quality sensors Built-in sensors for VOC, PM2.5, temperature and humidity
No sensors - optional use with Blueair Aware
The entire unit can be recycled.
External network issues affecting the product performance are beyond the control of Blueair. Please contact your
Internet service provider for assistance.
*
**
***
****
Specifications based on U.S. models (120 VAC, 60 Hz with particle filter)
The CADR indicates how much filtered air is delivered (airflow) by the air purifier operating at the highest
setting, and how well the system removes tobacco smoke, dust and pollen pollutants from the air (efficiency).
Tests are performed in accordance with ANSI/AHAM AC-1. The maximum possible CADR ratings according
to this standard are: Tobacco Smoke: 450 cfm. / Dust: 400 cfm. / Pollen: 450 cfm.
Air changes per hour are calculated on the recommended room size, assuming 8-foot (2.4 m) ceilings. For
smaller rooms, the air changes per hour will increase.
The available electrical power voltage and frequency affects the power consumption of the unit. The power
consumption might therefore be different from the stated value.
680i
605
680i
605
Dust
500
Pollen
640
500
Smoke
Loading ...
Loading ...
Loading ...