HD 600
instructions for use
Important safety instructions
HD 600 | 1
Important safety instructions
왘 Read the instruction manual carefully and completely before
using the product.
왘 Always include this safety guide when passing the product
on to third parties.
왘 Do not use an obviously defective product.
Preventing accident and damage to health
왘 Do not listen at high volume levels for long periods of time to
prevent hearing damage.
왘 Always maintain a distance of at least 4" (10 cm) between
the ear cups and the cardiac pacemaker or implanted defibril-
lator since the product generates permanent magnetic fields.
왘 Keep the product, accessories and packaging parts out of
reach of children and pets to prevent accidents and choking
hazards.
왘 Do not use the product in an environment that requires your
special attention (e.g. in traffic).
Preventing malfunction and damage to the product
왘 Always keep the product dry and do not expose it to extreme
temperatures (hairdryer, heater, extended exposure to sun-
light, etc.) to avoid corrosion or deformation.
왘 Use only attachments/accessories/spare parts supplied or
recommended by Sennheiser.
왘 Clean the product only with a soft, dry cloth.
Important safety instructions
2 | HD 600
Intended use/Liability
These headphones are designed for home use with high-quality
audio systems.
It
is considered improper use when this product is used for
any application not named in the associated product guides.
Sennheiser does not accept liability for damage arising from
abuse or misuse of this product and its attachments/accesso-
ries.
HD 600
HD 600 | 3
HD 600
• Audiophile “open-aire“, dynamic stereo headphones
• Advanced diaphragm design eliminates standing waves in
the diaphragm material
• Computer-optimized magnet systems minimize harmonic
and intermodulation distortion
• Extremely lightweight aluminum voice coils ensure excellent
transient response
• Neodymium-ferrous magnet systems for optimum sensi-
tivity and a wide dynamic range
• Exceptionally comfortable to wear due to elliptical design
adapted to the shape of the ears
• Detachable connection cable made from highly conductive
OFC copper, Kevlar-reinforced, with very low handling noise
• Exceptionally natural, spatial and accurate sound
• Can be directly connected to stationary hi-fi components of
the highest quality, in particular SACD, DVD-A, Blu-ray and CD
players
• Tap the full potential of your HD 600 with the Sennheiser
HDVA 600 or HDVD 800 balanced headphone amplifier and
the CH 650 S balanced connection cable
Instructions for use
Instructions for use can be found on page 7.
Specifications
4 | HD 600
Specifications
Frequency response 16 – 30,000 Hz (-3 dB)
12 – 38,000 Hz (-10 dB)
Transducer principle dynamic, “open-aire“
Frequency characteristic diffuse field equalized
Nominal impedance 300
Characteristic SPL at 1 kHz 97 dB
Load rating 0.2 W as per DIN 45580
THD 0.1 % as per DIN 45500
Contact pressure approx. 2.5 N
Ear coupling circumaural
Weight (without cable) approx. 260 g
Connector
3.5 / 6.3 mm stereo jack
Connection cable OFC cable, 3 m
Manufacturer Declarations
HD 600 | 5
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24
months on this product.
F
or the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
FOR AUSTRALIA ONLY
Sennheiser’s goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount
to a major failure.
This warranty is in addition to other rights or remedies under
law. Nothing in this warranty excludes, limits or modifies any
liability of Sennheiser which is imposed by law, or limits or mod-
ifies any remedy available to the consumer which is granted by
law. To make a claim under this warranty, contact Sennheiser
Australia Pty Ltd, Unit 3, 31 Gibbes Street, Chatswood NSW
2067, Australia; Phone: (02) 9910 6700,
email: [email protected].
All expenses of claiming the warranty will be borne by the
person making the claim.
The Sennheiser International Warranty is provided by
Sennheiser Australia Pty Ltd (ABN 68 165 388 312), Unit 3,
31 Gibbes Street, Chatswood NSW 2067, Australia.
Manufacturer Declarations
6 | HD 600
In compliance with the following requirements
• WEEE Directive (2012/19/EU)
Please dispose of this product by taking it to your
local collection point or recycling center for such
equipment.
CE Declaration of Conformity
• RoHS Directive (2011/65/EU)
The CE Declaration of Conformity is available at
www.sennheiser.com. Before putting the product into opera-
tion, please observe the respective country specific regulations.
China RoHS
ȵ : 表示该有毒物质或元素在该部件所有均质材料中的含量均
在 SJ/T11363-2006
标准规定的限量要求以下。
: 表示该有毒物质或元素至少在该部件的某一均质材料中的
含量超出
SJ/T11363-2006 标准规定的限量要求。
中国
部件名称
Part Name
有毒有害物质或元素
铅
Pb
汞
Hg
镉
Cd
六价铬
CrVI
多溴联苯
PBB
多溴二苯醚
PBDE
线材组合 ( 插头 )
Cable assembly (Plug)
×
ȵ ȵ ȵ ȵ ȵ
15
×
HD 600 | 7
Instructions for use
왘 Put on the headphones and
adjust the headband.
왘 Do not cover the transducers!
8 | HD 600
왘 The ear cushions have to be
replaced from time to time for
hygienic reasons (Ring ear-
cushions with foam disk, 1
pair, Art. no. 050635).
왘 How to change the cables
(Art. no. 081435).
Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany
www.sennheiser.com
Publ. 05/14, 560026/A01
