Loading ...
Loading ...
Loading ...
10
ALIGNING THE WALL PLATE
Draw a vertical line on the wall at the center of the
30s wide space.
8VHWKHPRXQWLQJSODWHas the template for the rear
ZDOO3ODFHWKHPRXQWLQJSODWHRQWKHZDOOPDNLQJ
sure that the tabs are touching the bottom of the
cabinet or the level line drawn in Step C for
cabinets with front overhang. Line up the notch
and centerline on the bottom of the mounting plate
to the centerline on the wall.
While holding the mounting plate with one hand,
draw circles on the wall at holes A, B, C and D
(see illustration above/actual plate marked with
DUURZVFour holes must be used for mounting.
NOTE:+ROHV&DQG'DUHLQVLGHDUHD(,IQHLWKHU
C nor D is in a stud, find a stud somewhere in area
E and draw a fifth circle to line up with the stud. It is
important to use at least one wood screw mounted
firmly in a stud to support the weight of the
microwave.
Set the mounting plate aside.
Risk of electric shock. Can cause
injury or death. Take care to not
drill into electrical wiring inside walls or cabinets.
Drill holes on the circles. If there is a stud, drill a
3
»16s
hole for wood screws. For holes that don’t line up
with a stud, drill a
5
»8s hole for toggle bolts. Drill two
5
»8s holes for toggle screws.
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
1
2
3
4
Draw a
9HUWLFDO/LQH
on Wall from
&HQWHURI7RS
Cabinet
Area E
+ROH$
+ROH%
+ROH'
+ROH&
D.
Installation Instructions
Wear gloves to avoid cutting fingers
on sharp edges.
Centerline
1RWFKHV
CAUTION
WARNING
Loading ...
Loading ...
Loading ...