Loading ...
Loading ...
Loading ...
Rinnai Australia 4 Operation Manual
USING WIRELESS WATER CONTROLLERS
TRANSFERRING PRIORITY BETWEEN WATER CONTROLLERS
To control the water delivery temperatures when using two or more
controllers it is necessary to have priority transferred to the water
controller you wish to use.
An illuminated Transfer indicator confirms that the desired water
controller is in control of the water delivery temperature.
If the Transfer indicator is not illuminated press the ‘Transfer’
button to transfer priority to the desired water controller.
The Transfer indicator on the water controller will now illuminate to
indicating that priority has been transferred and that the water heater is
ready to supply hot water once a hot water tap is opened.
Whilst hot water taps are open transfer of 'priority' between controllers is not possible.
This is a safety feature.
HOT WATER CONTROL
Temperatures higher than 50°C should only be able to be selected on the controller
labelled ‘Master’ controller (used in the kitchen), not on those labelled ‘Bathroom’
controllers. This helps minimise the risk of burns.
The wireless transceiver has been incorrectly assigned if temperatures in excess of
50°C are able to be selected on controllers used in bathrooms, ensuites, toilets and
laundries. Re-assign the wireless transceiver if this is the case. See “UN-ASSIGNING
AND RESETTING WIRELESS WATER CONTROLLERS” on page 14 and “INSTALLING
WIRELESS WATER CONTROLLERS” on page 13
USING CHILD LOCK FUNCTION
The Child Lock function is designed to prevent small children or the infirm
from operating the wireless controllers.
To Activate the Child Lock
To activate the Child Lock function press the button for 3 seconds. The
Child Lock indicator will illuminate to confirm that the function is now
active. Once activated only the initiating controller can then deactivate this
function?
To Deactivate the Child Lock
To deactivate the Child Lock function press the button for 3 seconds.
The Child Lock indicator will go out to show that the function is no
longer active.
Child lock only applies to the water controller initiating the function and can be
activated / de-activated regardless of priority status or whether the water heater is
in the ‘On’ or ‘Off’ condition.
While the child lock is activated only the ‘Child Lock’ control and the ‘Off’
control are functional from that controller.
When the water heater is turned ‘Off’ while Child lock is activated it can not be turned
‘On’ again from a controller where the Child lock is activated.
If the water heater is turned ‘Off’ whilst hot water outlets are open it can not be turned
back ‘On’ until all hot water outlets have been closed.
Child lock is de-activated during a battery change or when batteries fail.
NOTE
3 seconds
NOTE
Loading ...
Loading ...
Loading ...