Loading ...
Loading ...
Loading ...
49-2000660 Rev. 1 19
USING THE RANGE: Oven Racks
OVEN RACKS (Cont.)
Partial Extension Oven Racks (Cont.)
To replace a rack:
1. Place the rear rack locks over and onto the rack
supports (five rack positions are available including the
top position).
2. Slide the rack all the way in until the rear rack locks are
secure on the rear rack supports and press the front rack
locks onto the front rack supports.
3. Pull the rack all the way out to check that it is properly
engaged. If extension racks are difficult to replace or
remove, wipe the oven rack supports with cooking oil.
Do not wipe oil on the rack slides.
To lubricate the paddle:
Shake lubricant and apply to
the moving parts of the paddle
mechanisms as shown.
Using the Range
Slide the rack all the way
in and push down to lock
the front rack locks onto
the front rack supports
Front
rack
lock
LOW PROFILE OVEN RACK
Removing and Replacing Flat Racks
When placing and removing cookware, pull the rack out
to the bump (stop position) on the rack support.
To remove a rack, pull it toward you until it reaches the
stop position, tilt up the front of the rack and pull it out.
To replace a rack, place the curved end of the rack onto
the rack supports. Tilt up the front of the rack and push
the rack in until it
stops. Then lay the
rack flat and push
it in until it is all the
way into the oven.
Racks may become difficult to slide, especially after a
self-clean cycle. To improve sliding conditions, use a soft
cloth or paper towel to rub vegetable oil on the left and
ULJKWHGJHVRIWKHUDFNVDQGRUUDFNVXSSRUWV
NOTE: Remove unused racks when using the oven for
faster preheat, improved efficiency, and optimal cooking
performance.
Replacing racks
Removing racks
Rack stop
position
4
3
2
1
4
5
3
2
1
Loading ...
Loading ...
Loading ...