Loading ...
Loading ...
Loading ...
Installation en
15
Installation
1. Screw in the mounting supports for the extractor
hood until they are hand-tight, use a spirit level to
level the appliance and then screw the mounting
supports in fully.
2. Screw in the threaded bolt, leaving it protruding out
of the wall by 5 - 9 mm.
Hanging the appliance
1. If there is any protective film on the appliance, first
remove the protective film from the back and,
following installation, remove the rest of the film.
2. Remove the metal grease filter before hanging the
appliance.
3. Hang the appliance on the wall.
4. Firmly tighten the knurled nuts.
5. Reinsert the metal grease filter and connect the
power supply.
NJONN
NBYNN
&
Loading ...