Loading ...
Loading ...
Loading ...
34
English
Clock/Timer
Clock setting
See "Preparations-Step 2: Setting the clock".
Timer setting
● The system can be used as an alarm clock,
whereby the DISC or TUNER is switched on at a
set time (one time operation). The clock time
needs to be set first before the timer can be
used.
1 In standby mode, press and hold SLEEP/
TIMER on the remote for more than two
seconds.
➜ “SELECT SOURCE” scrolls followed by the
last selected source.
2 Press SOURCE to select your desired source
and press SLEEP/TIMER to confirm.
➜ “SET ON TIME” scrolls followed by “ON 0 :
00”.
3 Press SEARCH 22/33 ( ¡/™ on the
remote) to set the hours and press SLEEP/
TIMER to confirm.
4 Press SEARCH 22/33 ( ¡/™ on the
remote) to set the minutes and press SLEEP/
TIMER to complete the setting.
➜ The timer is now set and activated.
Activating and deactivating timer
● In standby or during playback, press SLEEP/
TIMER on the remote once.
➜ Display shows
if activated, and disappears
if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
1 Press SLEEP/TIMER on the remote control
repeatedly to select a preset time.
➜ The selections are as follows (time in
minutes):
90 ™ 80 ™ 70 ™ 60 ™ 50 ™ 40 ™ 30 ™
20 ™ 10 ™ OFF
➜ "SLEEP XX" or "OFF" is displayed. "XX" is the
time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP/TIMER button.
To deactivate the sleep timer
● Press SLEEP/TIMER repeatedly until "OFF" is
displayed, or press STANDBY-ON/ECO
POWER y.
31
1
4
7
2
5
8
0
3
6
9
ANGLE
PROG
GOTO
AUDIO SUBTITLE
ZOOM
VOL
+
ECHO
KEY
SOUND
DBB
IS
OK
SYSTEM MENU
MODE REPEAT A-B SLEEP
TIMER OSD
DISPLAY
MUTEAUX
DISC MENU
DISC
TUNERTUNER
pg 001-039_FWD831_-Eng 6/18/07, 5:51 PM34
Loading ...
Loading ...
Loading ...