Loading ...
Loading ...
Loading ...
English
33
Radio Reception
Tuning to radio stations
1 Select TUNER source.
➜ “FM” or “MW” is displayed.
2 Press DISPLAY/BAND (TUNER on the
remote) to select the desired waveband : FM or
MW.
3 Press and hold SEARCH 22/33 and then
release it.
➜ The display will show "SEARCH" until a radio
station with sufficient signal strength is found.
4 Repeat step 3 if necessary until you find the
desired station.
● To tune to a weak station, press SEARCH
22/33 briefly and repeatedly until you have
found optimal reception.
Programming radio stations
You can store up to 40 radio stations in the
memory (20 for FM and 20 for MW).
Automatic programming
Press PROG/ANGLE for more than three
seconds to activate programming.
➜ All available stations are programmed.
➜ AUTO is displayed and available stations are
programmed in order of waveband.
Manual programming
1 Tune to your desired station (refer to “Tuning to
radio stations”).
2 Press PROG/ANGLE to activate programming.
➜ PROG flashes on the display and PX appears,
in which X stands for the programme number.
3 Press PRESET í/ë to allocate a number
from 1 to 20 for this station.
4 Press PROG/ANGLE again to confirm the
setting.
➜ The frequency of the preset station is shown.
5 Repeat the above four steps to store other
stations.
● You can override a preset station by storing
another frequency in its place.
Note:
– During setting, if no button is pressed within 30
seconds, the system will exit manual programming
automatically.
Tuning to preset radio stations
● Press PRESET í/ë until the desired preset
station is displayed.
31
1
4
7
2
5
8
0
3
6
9
ANGLE
PROG
GOTO
AUDIO SUBTITLE
ZOOM
VOL
+
ECHO
KEY
SOUND
DBB
IS
OK
SYSTEM MENU
MODE REPEAT A-B SLEEP
TIMER OSD
DISPLAY
MUTEAUX
DISC MENU
DISC
TUNERTUNER
pg 001-039_FWD831_-Eng 6/18/07, 5:51 PM33
Loading ...
Loading ...
Loading ...