Loading ...
Loading ...
Loading ...
6
Parts and Controls
Front
Spindle (page 9)
Rubber mat (page 8, 10)
Platter (page 8, 9)
Place the platter on the spindle while you are
assembling your turntable. It has a drive belt
wound around on the back side.
SPEED/POWER rotary switch knob
(page 16, 19)
Rotate the knob to turn on/off your turntable
or select the rotation speed appropriate to the
vinyl record to play.
Dust cover (page 8, 13)
Dust cover hinges (page 8, 13)
Counterweight (page 8, 11)
Rotate the counterweight to adjust the tone
arm balance and the stylus pressure after you
have assembled your turntable.
Anti-skating knob (page 10, 12)
Rotate this knob to adjust the anti-skating
force after you have assembled your turntable.
Tone arm lock (page 11, 16, 17)
Lock the tone arm to protect it against physical
shock when you do not intend to play a vinyl
record.
Tone arm lifter lever (page 16)
Use this lever to raise or lower the tone arm.
The tone arm descends slowly.
Tone arm rest (page 11, 17)
Place the tone arm here while you are not
playing a vinyl record.
Tone arm (page 10, 16, 17)
Stylus (page 20)
Note
The stylus is a high precision component.
Handle it with care to avoid damage.
Cartridge body (page 20)
Headshell (page 16)
Loading ...
Loading ...
Loading ...