Loading ...
Loading ...
Loading ...
16. Thread cable end through the jam nut and into the head plate bayonet. See Cable Handling Guide for details.
Item Description Qty.
1 Cable 1
2 Nut, M16 Hex Jam 1
3 Head Plate Bayonet 1
NOTE: Check proper thread engagement. To do so, attempt to pass a 7mm Allen wrench through the portal in the head plate
bayonet. If it goes through, more threads are needed to meet the minimum requirement.
Correct Depth: Thread engagement exceeds minimum depth. Incorrect Depth: Thread engagement not deep enough.
17. Select either the LBS or KG weight stack label. Remove backing from label and apply to weight stack.
NOTE: One weight stack label sheet, LBS or KG, is used for both weight stacks.
Item Description Qty.
1 Weight Stack Label 1
2 Weight Stack 1
18. Test the tower assembly.
19. Route cable out through hole at the bottom of tower side tube. Route cable through the lower pulley assembly.
Page 19 of 36
Loading ...
Loading ...
Loading ...