Loading ...
Loading ...
Loading ...
12
11 PRODUCT SPECIFICATIONS
General specication:
• Model: Bar 2.1 Deep Bass CNTR (Soundbar Unit), Bar 2.1
Deep Bass SUB (Subwoofer Unit)
• Power supply: 100 - 240V AC, ~ 50/60 Hz
• Total speaker power output (Max. @THD 1%): 300 W
• Output power (Max. @THD 1%): 2 x 50 W (Soundbar)
• 200 W (Subwoofer)
• Transducer: 4 x racetrack drivers + 2 x 1” tweeter
(Soundbar); 6.5” (subwoofer)
• Soundbar and Subwoofer standby power: <0.5 W
• Operating temperature: 0°C - 45 °C
Video specication:
• HDMI Video input: 1
• HDMI Video output (With Audio return channel): 1
• HDMI version: 1.4
Audio specication:
• Frequency response: 40 Hz - 20 KHz
• Audio inputs: 1 Optical, Bluetooth, USB (USB playback is
available in US version. For other versions, USB is for Service
only.)
USB specication (Audio playback is for US version only):
• USB port: Type A
• USB rating: 5 V DC / 0.5 A
• Supporting le format: mp3, wav
• MP3 Codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3, MPEG
2.5 Layer 3
• MP3 sampling rate: 16 - 48 KHz
• MP3 bitrate: 80 - 320 kbps
• WAV sample rate: 16 - 48 KHz
• WAV bitrate: Up to 3000 kbps
Wireless specication:
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.3, AVRCP V1.5
• Bluetooth frequency range: 2402 MHz - 2480 MHz
• Bluetooth Max. transmitting power: < 10 dBm (EIRP)
• Modulation Type: GFSK, π/4 DQPSK, 8DPSK
• 5G Wireless frequency range: 5736.35 - 5820.35 MHz
• 5G Max. transmitting power: < 9 dBm (EIRP)
• Modulation Type: π/4 DQPSK
Dimensions
• Dimensions (W x H x D): 965 x 58 x 85 mm / 38” x 2.28” x
3.35”(Soundbar);
• 240 x 240 x 379 (mm) /8.9” x 8.9” x 14.6” (Subwoofer)
• Weight: 2.16 kg (Soundbar); 5.67 kg (Subwoofer)
• Packaging dimensions (W x H x D): 1045 x 310 x 405 mm
• Packaging weight (Gross weight): 10.4 kg
12 TROUBLESHOOTING
Never try to repair the product yourself. If you have problems
using this product, check the following points before you request
services.
System
The unit will not turn on.
• Check if the power cord is plugged into power and the
soundbar.
The soundbar has no response to button pressing.
• Restore the soundbar to factory settings (See the
“RESTORE FACTORY SETTINGS” chapter).
Sound
No sound from the soundbar
• Make sure that the soundbar is not muted.
• Select the correct audio input source on the remote control.
• Connect the soundbar to your TV or other devices properly
• Restore the soundbar to its factory settings by pressing
and holding and on the soundbar for more than 10
seconds.
Distorted sound or echo
• If you play audio from your TV through the soundbar, make
sure that your TV is muted or the built-in TV speaker is
disabled.
Audio and video are not synchronized.
• Enable the audio sync function to synchronize audio and
video (See “Audio sync” in the “SOUND SETTINGS” chapter).
Video
Distorted pictures streamed through Apple TV
• The Apple TV 4K format requires HDMI V2.0 and is not
supported by this product. As a result, a distorted picture or
black TV screen may occur.
Bluetooth
A device cannot be connected with the soundbar.
• Check if you have enabled Bluetooth on the device.
• If the soundbar has been paired with another Bluetooth
device, reset Bluetooth (see “To connect to another device”
under “Bluetooth connection” in the “CONNECT” chapter).
• If your Bluetooth device has ever been paired with the
soundbar, reset Bluetooth on the soundbar, unpair the
soundbar on the Bluetooth device, and then, pair the
Bluetooth device with the soundbar again (see “To connect
to another device” under “Bluetooth connection” in the
“CONNECT” chapter).
Poor audio quality from a connected Bluetooth device
• The Bluetooth reception is poor. Move the source device
closer to the soundbar, or remove any obstacle between the
source device and the soundbar.
JBL_SB_Bar 2.1_OM_V3.indd 12 7/4/2019 3:26:42 PM
Loading ...
Loading ...