Loading ...
Loading ...
Loading ...
SB-GM-HUMRH3/10W1v2_ 011215
CONGRATULATIONS
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
STEP 22
Secure the driver’s side rear plastic inner fender.
Using a 10mm socket and ratchet, secure the 5 bolts.
Using a Phillip® head screw driver, secure the 2 screws
Pop in the 5 plastic pop-rivets.
STEP 21
From the cargo entrance, reapply the weather stripping.
STEP 20
Secure the driver’s side rear door sill.
Page 4 • JL Audio, Inc 2006
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011215-08-23-2006 • Printed in USA • ©2006 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
INCLUDED HARDWARE
(1) 13/8-inch - 16 x 2-1/4-inch Socket Cup Screw (1) 3/8-inch - 16 x 1-1/4-inch Hex Bolt
(1) 3/8-inch x 1-1/4-inch Fender Washer (1) L- Br ac ket
(2) 3/8-inch x 3/4-inch USS Flat Washer (1) Foam Bar
(2) 3/8-inch Lock Washer (1) Double Sided Tape
(1) 3-inch x 3-inch Wax Square
SPECIFICATIONS
Enclosure Type: Acoustic Suspension (sealed)
Driver Type: 10W1v2-4
Nominal Impedance: 4 ohms mono
Continuous Power Handling: 150 Wat ts
POWER RECOMMENDATION
JL Audio recommends using a high quality amplifier such as the JL Audio a2150.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the a2150 when
being used to power your Stealthbox
®
.
The JL Audio a2150 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 6.5-inch / Front Doors
Fits JL Audio Models: TR650-CXi, VR650-CSi, VR650-CXi, XR650-CSi, XR650-CXi & ZR650-CSi
Rear Speaker Size / Location: 6.5-inch / Rear Doors
Fits JL Audio Models: TR650-CXi, VR650-CXi & XR650-CXi