Loading ...
Loading ...
Loading ...
en
6
Connecting the appliance
After setting up the appliance, wait for at least 2 hours
before starting the appliance up. The oil contained in
the compressor may have been displaced into the
refrigeration system during transport.
Before starting the appliance up for the first time, clean
its interior (see section headed Cleaning the
appliance).
Before connecting the appliance, make sure that the
condensation drain with the two drain plugs is properly
closed.
Electrical connection
The socket must be near to the appliance and easily
accessible after the appliance has been installed.
The appliance conforms to protection class I. Connect
the appliance to a 220-240 V/50 Hz alternating current
supply using a socket with protective earthing
conductor which has been correctly installed. The
socket must be protected by a fuse with a rating of
10 A to 16 A.
In the case of appliances operated outside of Europe,
check whether the voltage and type of current specified
conform to the values of your electricity grid. You will
find this information on the rating plate.
m Warning
The appliance must never be connected up to an
electronic energy-saving socket.
Sinusoidal-commutated and line-commutated inverters
can be used with our appliances. Line-commutated
inverters are used with photovoltaic systems that are
connected directly to the national grid. Sinusoidal-
communicated inverters must be used with standalone
applications (e.g. on ships or mountain huts) that do
not have a direct connection to the national grid.
Levelling the appliance
Use a spirit level to align the appliance.
Level out any unevenness in the ground using support
spacers.
Note
If required, secure the appliance against rolling away.
Getting to know the appliance
Appliance
The features of the models may vary.
The illustrations may differ from your particular model.
1 LED light
2 Basket
3 Condensation drainage with drain plugs
4 Removable separating wall
5 Pre-freezing compartment
6 Lock
7 "super" button
For switching the super freezing function on and
off.
8 "alarm" indicator
The indicator lights up if it is too warm in the
device.
9 "on" indicator
The indicator lights up if the appliance is
switched on.
10 Temperature controller
For setting the temperature.
Loading ...
Loading ...
Loading ...