Loading ...
Loading ...
Loading ...
en
5
Wall clearance
If the appliance is positioned in the corner of a room or
a recess, minimum clearances must be maintained so
that the heated air is able to escape unimpeded.
Screw the enclosed spacers to the designated holders.
Installation site
The ideal installation site is a dry, well ventilated room.
The appliance should not be installed in a position that
is exposed to direct sunlight or close to a source of
heat, such as a cooker or radiator. If installation near to
a source of heat is unavoidable, use a suitable
insulating panel or keep to the following minimum
distances from the source of heat:
■ 3 cm from an electric or gas cooker.
■ 30 cm from oil or solid fuel cookers.
Transport locks
Open the cover and remove the transport locks
between lid and device.
Observe the room temperature and
ventilation requirements
Room temperature
The appliance is designed for a certain climate class.
Depending on the climate class, the appliance can be
operated at the following ambient temperatures.
The climate class is specified on the rating plate.
Note
The appliance is fully functional within the room
temperature limits of the specified climate class. If an
appliance in the SN climate class is operated at lower
ambient temperatures, damage to the appliance can be
excluded up to a temperature of +5 °C.
Ventilation
The heated air must be able to escape unimpeded.
Otherwise, the refrigerating unit has to work harder,
which increases the appliance's power consumption.
Therefore:
■ Never cover over or block the air vent.
■ Keep minimum distances to walls and furniture.
Climate class Permissible room temperature
SN +10 °C to 32 °C
N +16 °C to 32 °C
ST +16 °C to 38 °C
T +16 °C to 43 °C
Loading ...
Loading ...
Loading ...