User Manual - Page 198

For 2019 Wrangler.

Loading ...
Loading ...
Loading ...
196 GETTING TO KNOW YOUR INSTRUMENT PANEL
Oil Change Reset — If Equipped
Your vehicle may be equipped with an engine oil change
indicator system. The “Oil Change Required” message will
display in the instrument cluster display for five seconds
after a single chime has sounded to indicate the next sched
-
uled oil change interval. The engine oil change indicator
s
ystem i
s duty cycle based, which means the engine oil
change interval may fluctuate, dependent upon your
personal driving style.
Unless reset, this message will continue to display each time
you plac
e the ignition in the ON/RUN position. To turn off
the message temporarily, push and release the OK button.
To reset the oil change indicator system (after performing the
scheduled maintenance), refer to the following procedure.
Oil Life Reset
1. Without pushing the brake pedal, place the ignition in the
ON/RUN
mode (do not start the engine).
2. Navigate to "Oil Life" submenu in "Vehicle Info" in the
instru
ment cluster display.
3. Push and hold the OK butt
on until the gauge resets to
100%.
Secondary Method For Oil Change Reset Procedure
1. Without pushing the brake pedal, place the ignition in the
ON/RUN
position (do not start the engine).
2. Fu
lly press the accelerator pedal, slowly, three times
wi
thin
ten seconds.
3. Without pushing the brake pedal, place the ignition in the
OFF/LOCK
position.
NOTE:
If the indicator message illuminates when you start the
vehicle
, the oil change indicator system did not reset. If
necessary, repeat this procedure.
Instrument Cluster Display Menu Items
NOTE:
The instrument cluster display menu items display in the
center
of the instrument cluster. Menu items may vary
depending on your vehicle features.
Loading ...
Loading ...
Loading ...