Loading ...
Loading ...
Loading ...
Functions
HUMIDIFY
To activate the HUMIDIFY function, press the HUMIDIFY button once to turn on.
Ensure there is enough water in the water tank. The LED indicator light will illuminate
once activated. Press this button again to turn o the HUMIDIFY function, and to
use as a fan only.
The unit is also equipped with the below functions.
LOW WATER PROTECTION
When there is insucient water in the water tank, the pump will stop working for
1 minute, and then the LOW WATER indicator will start to ash. It won't stop the
other functions from working, just the HUMIDIFY function. Fill the water tank if this
happens.
DIM DISPLAY
When the unit is working, after 40 seconds of any buttons being pressed, the
indicator lights will dim. Press any button (except for the ON/OFF button) and the
indicator lights will reactivate.
MEMORY FUNCTION
This unit has a memory function. When the fan is turned OFF, it memorises the
settings previously used. When the unit is turned ON again, it will start in the same
settings as previously used (unless the power supply was fully disconnected). If the
unit was in SLEEP mode previously, it will start in natural wind mode.
AUTO OFF
If there isn't any change in settings after 15 hours of constant use, the unit will turn
OFF automatically. This is an additional safety feature in case the unit is left ON
accidentally.
FILTER REMOVAL PROTECTION
If the lter has been removed during operation (not recommended!), the unit will
stop working until the lter is replaced. The unit will enter standby mode and will
need to be turned ON again if this happens.
REMOTE CONTROL
This unit comes with a remote control, and all settings can be control via the remote.
9
Loading ...
Loading ...
Loading ...