Loading ...
Loading ...
Loading ...
Cleaning
Your unit is designed to remove dirt and other atmospheric impurities by drawing air
through the air lter. DO NOT block the air lter, as this will impair the eciency of
the unit. Pushing the unit up against a wall or operating it in close proximity to long
window drapes will also impair the unit’s air ow and eciency.
Rear Air Filter
This is easily accessible by removing the rear screen and lter.
Disconnect the unit from the main supply & remove the lter. Gently wash the
lter in mild, soapy water, dry and replace. Be sure to re-t the rear screen
securely. No special tools are required for this.
Water tank lter screen
While the rear air lter is removed, put your hand in the water tank and remove
the small water tank lter by pulling gently upwards.
Clean the lter with a soft brush and warm water. Replace lter once clean.
Water Tank
The water tank is integrated, however it should be cleaned regularly. If not cleaned,
deposits may build up aecting the eciency of the unit. Cleaning the tank with
mild soapy water once every few weeks is recommended. To do this, follow the steps
below:
1. Disconnect the appliance from the main power supply.
2. Remove the rear air lter.
3. Remove the rubber plug and let any water drain out. Replace the rubber plug and
ll the tank with soapy water and use a cloth to gently wash around.
4. Flush out the soapy water and rinse with clean water until all soap suds are gone..
5. Replace the plug, ll with clean water, and reverse the procedure and ensure the
rear air lter is in place.
Outside Cabinet
1. Turn the unit OFF and disconnect the appliance from the power supply.
2. Remove any dust build up with a soft brush.
3. Wipe the surface of the unit with a soft damp cloth. Mild detergent can be used
for any stubborn marks.
Do not use abrasive sponges, scouring pads, or a sti brush to clean the unit.
IMPORTANT
The control panel and other parts must not come into contact with water or any
other liquids.
12
Loading ...
Loading ...