Loading ...
Loading ...
Loading ...
Operation
1. Remove the unit from its packaging
2. To begin using the HUMIDFY function, ensure the water tank is lled with water
by checking the water level window indicator.
3. For extra cooling power, place the ice pack (supplied) into the unit as described
on page 10..
4. Plug into a power supply and press the ON/OFF button to start the appliance.
5. The unit will operate initially on a continual basis. If a set period of operation is
required, please follow the TIMER instructions on page 8.
6. Select the desired fan FAN SPEED by pressing the FAN SPEED button. Refer to
page 8 for dierent settings.
7. Select the operation MODE as required, by pressing the MODE button. Refer to
page 8 for dierent settings.
8. Press the LEFT / RIGHT swing function as required.
9. To switch the unit o at any time, press the OFF button.
Precautions
• Do not overll the water tank (check the MAX ll line).
• Use only cold, clean ltered water.
• The unit is equipped with a number of safety devices, including a water shortage
protection & lter removal protection.
• Do not allow the same water to sit in the machine for a prolonged period.
• It is recommended that any water left in the machine for 3 days or more be re-
moved and replaced with clean water.
• The control panel must not come in contact with water or any other liquids.
Using the Remote Control
1. Open the battery cover of the remote control, and insert a 2 x AAA batteries.
2. Please point to the receiver when using the remote control.
3. If the battery voltage is low, please open the battery cover as per the diagram
and replace with new batteries (2 x AAA). Then replace the battery cover.
Add water
11
Loading ...
Loading ...
Loading ...