Loading ...
Loading ...
Loading ...
EN
©2021 Hestan Commercial Corporation
10
DOOR INFORMATION
DOOR OPTIONSDOOR OPTIONS
Hestan residential units can be converted from stainless steel to overlay panels to match existing
cabinetry. Solid stainless steel and stainless steel glass doors are shipped from the factory with
decorative stainless steel panels and handles in place on the unit. All stainless steel doors and
drawers are convertible to fully integrated models, ready to accept custom panels from your
cabinetry supplier. You can contact Hestan Customer Care to send you any of the following
templates, or download directly from the Hestan website at www.hestanoutdoor.com.
028370 - Template, Overlay, 24” Solid Door, Undercounter Refrigeration
028371 - Template, Overlay, 24” Toe Kick/Grille, Undercounter Refrigeration
028372 - Template, Overlay, 24” Glass Door, Undercounter Refrigeration
028373 - Template, Overlay, 24” Solid Drawer, Undercounter Refrigeration
028374 - Installation Instructions, Overlay Door/Drawer, Undercounter Refrigeration
Take care in choosing the correct template for your specific unit. The original appliance handle or
custom cabinet handle can be installed onto your overlay panel.
NOTE: Glass with stainless steel trim and glass with wood trim may sweat in conditions with relative
humidity over 75%.
HANDLE INSTALLATIONHANDLE INSTALLATION
The handle mounting on the overlay panel should be mounted on the overlay only (not the actual
door) to avoid damage to the factory door. Proper woodworking materials and equipment should be
used to avoid damage or errors in workmanship.
1. Handle must be attached to the overlay before mounting the overlay onto the door. Mark the
rear of the overlay panel with handle fastening locations.
2. Drill through the overlay panel at marked locations, taking care not to damage the panel.
3. Countersink screw heads so that screw heads are flush with the back side of the panel. Attach
the handle to the overlay panel.
DOOR LOCK INSTALLATIONDOOR LOCK INSTALLATION
Proper woodworking materials and equipment
should be used to avoid damage or errors in
workmanship.
NOTE: Lock installation information is available
on the above-mentioned template drawings.
Take care in choosing the correct template for
your specific model.
When installing to an overlay panel, perform the
lock installation before mounting the overlay to
the door!
1. See Figure 5. Attach mounting bracket to
overlay panel.
2. Insert lock body and attach with nut. Re-
install remaining parts as shown.
Mounting Bracket
Screw
Lockwasher
Lock Striker
Nut
Lock Bracket
Lock
Cylinder
Figure 5. Installing Door Lock
Loading ...
Loading ...
Loading ...