Loading ...
Loading ...
3
2. The design of the XR100 Loudspeaker took into
account the acoustic characteristics of the Front
Panel Grille and it should be attached to the Loud-
speaker for the best sonic performance.
3. If there is an obvious lack of high, mid or low
frequencies after extended periods of overdrive,
the Protection Device(s) may have activated. These
devices will automatically reset when the volume
level is greatly reduced until the output of the af-
fected Loudspeaker Driver(s) returns to normal.
4. When discarding the unit, comply with local rules
or regulations. Batteries should never be thrown
away or incinerated but disposed of in
accordance with the local regulations
concerning battery disposal.
5. For additional information on the XR100
and other McIntosh Products please visit
the McIntosh Web Site at www.mcintosh-
labs.com.
Caution: The XR100 weight is 68.5 pounds (31.1
kg). It requires two or more persons to
safely handle the Loudspeaker System.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the XR100 Loudspeaker.
Safety Instructions .................................................... 2
Thank You and Please Take a Moment ..................... 3
Technical Assistance and Customer Service ............ 3
Table of Contents, General Information and
Connector/Cable Information ................................ 3
Introduction and Performance Features .................... 5
Dimensions ............................................................6-7
Unpacking the Loudspeaker and
Attaching the Feet .................................................... 8
Installation .............................................................8-9
How to Connect using a single Amplifier ......... 10 -11
How to Connect using two Amplifiers .............. 12-13
Specifications .......................................................... 14
Packing Instruction ................................................. 15
Table of Contents
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all McIntosh
products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
Copyright 2012 © by McIntosh Laboratory, Inc.
General Information
Your decision to own this McIntosh XR100 Loud-
speaker System ranks you at the very top among
discriminating music listeners.. You now have “The
Best.” The McIntosh dedication to “Quality,” is as-
surance that you will receive many years of listening
enjoyment from this unit.
Please take a short time to read the information in
this manual. We want you to be as familiar as pos-
sible with all the features and functions of your new
McIntosh.
Power Control Connectors
The XR100 Power Control Jacks (IN/OUT) receive
and pass on an ON/OFF signal from +5 to +12 volts.
An additional connection passes on Meter Illumina-
tion Control for compatible
Power Amplifiers. The 1/8
inch stereo mini phone plug
connects to a McIntosh Pream-
plifier or A/V Control Center
Power Control Output.
Connector/Cable Information
Power
Control
Ground
Meter
Illumination
Control
Pass Thru
Loading ...
Loading ...
Loading ...