Loading ...
Loading ...
Loading ...
8 9
STAND-BY MODE
After 6 minutes since the microwave oven is plugged
to a power outlet, if there are no operations carried
out, it will automatically enter Stand-by mode.
As soon as the product enters Stand-by mode, the
display will show the clock (or, if the clock has not
been set, the display will show “:”) and the Start
Protection / Child Lock icon.
In daily use, the microwave oven will automatically
enter Stand-by Mode when the door is closed and
the product is not in use after 6 minutes.
To exit Stand-by mode, simply open the door.
START PROTECTION / CHILD LOCK
This automatic safety function is activated, after 6
minutes from the last interaction with the microwave
oven, when the product is not in use and the door is
closed.
When the Start Protection / Child Lock is active, the
dedicated icon is shown on the display and it is not
possible to use the Control Panel. Open and close
the door to unlock the Control Panel.
Depending on the selected function, it could be
needed to stir / turn food during cooking. In these
cases the oven will pause cooking and it will ask you
to perform the needed action.
When required, you should:
q
Open the door.
w
Stir or Turn the food (depending on the required
action).
e
Close the door and restart by pressing Ok / Jet
Start button.
Notes: if the door is not opened within 2 minutes
from the request to Stir or Turn the food, the oven will
continuethecookingprocess(inthiscasethenal
result may not be the optimal one).
STIR/ TURN FOOD
i
PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, turn or stir
the food by opening the door. The setting will be
maintained for 5 minutes.
To continue cooking:
Close the door and press the Ok / Jet Start button.
The cooking is resumed from where it was paused.
If you don’t want to continue cooking you can:
Remove the food, close the door and press the Stop
button.
When the cooking is finished:
The display will show the text “End”. An acoustic
beep will signal once a minute for 10 minutes, this is
normal behaviour intended for cooling the product.
Depending on the product, the cooling fan or the
internal lamp may continue to operate.
If desired, simply press the STOP button or open
the door to cancel the signal and stop the cooling
time. Please note that reducing or stopping this
programmed cooling cycle will not have a negative
impact on the functioning of the product.
CLOCK
To set the Clock of your appliance:
q
Press the Clock button.
w
Rotate the knob to set the hours.
e
Press the Clock button again.The minutes will start
blinking.
r
Rotate the knob to set the minutes.
t
Press the Clock button.The clock is set.
•If the clock has not been set after plug in, the display will show “:”.
•During the setting of the clock, if you press the Stop button or if the setting is not completed after a long
time, the oven will exit from setting mode and the setting will be invalid, display will show “:”.
Tips and suggestions:
Note:
Thersttimetheapplianceispluggedin(orafterapower
failure), the product will automatically enter the Clock
Setting mode. Please follow the above procedure starting
from step No.2.
Loading ...
Loading ...
Loading ...