Loading ...
Loading ...
Loading ...
Instruments & Controls 33
Controls & Features
Start Button
The start button is used for starting the engine. Pushing the button in starts the
engine. See Starting Procedure, page 54.
When the start button is pushed, the starter motor will crank the engine; the
headlight will automatically go out, but the taillight will stay on.
The starter motor will not operate if the engine stop switch is in the OFF
position when the start button is pushed.
Hazard Switch
The hazard switch is used to activate the hazard lights on your motorcycle if you
need to stop near heavy traffic or if your motorcycle is disabled.
To operate, turn the ignition key to the ON or ACC position, and push the
hazard switch. The front and rear turn signals will blink simultaneously until
you push the switch again.
If you anticipate using the hazard system for an extended time, use the ACC
position and turn off all unnecessary accessories to conserve battery capacity.
Be su
re to turn the switch off when the hazard warning is no longer required, or
the
turn signals will not work properly and may confuse other drivers.
Loading ...
Loading ...
Loading ...