Loading ...
Loading ...
Loading ...
150 Servicing Your Honda
Final Drive Oil
Oil Recommendation
type hypoid gear oil
viscosity(weight) SAE 80
Checking & Adding Oil
Refer to Safety Precautions on page 118.
RIGHT REAR
oil fill cap
lower edge
(Models equipped with center stand)
1. Place the motorcycle on its center stand on a firm, level surface.
(Models not equipped with center stand)
1. Hold the motorcycle upright on firm level ground.
2. Remove the oil fill cap.
3. Check the oil level. It should be flush with the lower edge of the oil fill hole.
4. If the level is low, check for oil
leaks. Add the recommended oil through the
oil fill hole until it reaches the lower edge of the opening.
5. Install the oil fill cap.
Final Drive Oil
Loading ...
Loading ...
Loading ...