GENERAL INSTALLATION GUIDELINES
• It is normal for black carbon nes (particles) to appear on the outside of
your lter. This happens when the lter is jarred in shipping. It is safe,
simply wipe it o.
• The lter connectors are larger to prevent leaks. You might have to
twist the lter hard to make sure the connection is secure.
INSTALLING THE WATER FILTER
Carefully remove the plastic cap from the new lter before installation.
1 YOU MUST SOAK your new lter in water for 15 minutes prior to
installing it in your refrigerator to remove air from the carbon block.
2 Twist the old lter a quarter-turn counter-clockwise, then pull it straight
out.
3 Remove the reusable color-keyed knob from the end of your old lter,
then slide it on your new lter.
4 Discard the old lter.
5 Push the new lter into the refrigerator until it stops.
6 Twist the lter a quarter-turn clockwise.
7 Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be
cloudy and sputter until the air is removed.
8 Reset your “change lter” indicator (if your refrigerator has one). See below.
RESETTING YOUR CHANGE FILTER INDICATOR
Note: These are the most common lter reset instructions. If the instructions don’t
work for your refrigerator brand, see the documentation that came with your
refrigerator.
Before using your new product, please read these instructions to prevent any damage.
PACKAGE CONTENTS
• Refrigerator lter(s) (2 pack)
• Quick Setup Guide
REFRIGERATOR BRAND
Kenmore
Whirlpool® and
Kitchen Aid®
INSTRUCTIONS
The water lter reset for Kenmore refrigerators
varies by model. See the documentation that came
with your refrigerator.
Press the light switch ve times within ten seconds.
If the fridge has a lter button, press and hold it for
5-10 seconds.
QUICK SETUP GUIDE
Refrigerator Filter
NS-4396508-2
Loading ...
