Loading ...
Loading ...
Loading ...
8
CAUTION: Do not vacuum drywall dust, replace soot, or ash with a standard Wet/Dry lter. This
is a very ne dust which will not be captured by the lter and may cause damage to the motor.
When vacuuming ne dust, use a ne dust lter (included). To purchase the additional ne dust
lters, call 1-866-384-8432 or get them at your local or online Vacmaster
®
retailer.
LIQUID VACUUM OPERATION
WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY, INFORMATION ENTITLED
‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE
GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS
INCLUDE BUT ARE NOT LIMITED TO: LIGHTER FLUID, SOLVENT TYPE CLEANERS, OIL-
BASED PAINTS, GASOLINE, ALCOHOL, OR AEROSOL SPRAYS. EXPLOSIVE DUSTS
INCLUDE BUT ARE NOT LIMITED TO: COAL, MAGNESIUM, GRAIN, OR GUN POWDER.
TO REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT
VACUUM TOXIC MATERIALS.
WARNING: DO NOT PLUG POWER CORD INTO POWER OUTLET. MAKE SURE PLUG IS
DISCONNECTED BEFORE CHANGING THE FILTERS.
LIQUID VACUUMING
1 2 3 4 5
6
1. Verify that the power cord is disconnected from the outlet. (Fig. 1)
2. In order to prepare your vacuum for dry vacuuming, verify that the cartridge lter is securely
mounted. With the power head removed and in an upside down position, make sure the lter
is pushed in until it stops against the power head and the retainer is installed. Your wet/dry vac
comes with the cartridge lter pre-installed. For installation instructions see page 11. (Fig. 2)
3. Place the power head back on the collection tank and secure it in place using the latches. (Fig.
3)
4. Insert the locking end of the hose into the vacuum port and lock into place. Push the required
attachment onto the free end of the hose or extension. (Fig. 4)
5. Plug the power cord into the power outlet. (Fig. 5)
6. Turn the motor on by ipping the switch to the 'I' ON position. (Fig. 6)
7. Once you have nished vacuuming, ip the switch to the 'O' OFF position and unplug the power
cord from the outlet. (Fig. 7)
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR LIQUID VACUUMING.
DO NOT USE DUST BAG FOR LIQUID VACUUMING.
Loading ...
Loading ...
Loading ...