Loading ...
Loading ...
Loading ...
12
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
TROUBLESHOOTING.
TROUBLESHOOTING
Symptom Possible Causes Corrective Action
Wet/Dry Vacuum will not
operate.
1) No power supply.
1) Check power supply: cord,
breakers, fuses.
2) Faulty power cord.
2) Check the power cord and
repair or replace as necessary.
3) Collection tank full. 3) Empty collection tank.
Dust comes out from motor
cover.
1) The cartridge lter is missing
or damaged.
1) Attach or replace cartridge
lter.
Reduced efciency and motor/
speed vibration.
1) There is a blockage in the
nozzle, hose, or the collection
tank inlet. The cartridge lter is
clogged by ne dust.
1) Check nozzle, hose and
collection tank in lets f or
blockage. Take off the lter
and clean it or install a new
cartridge lter.
Installing Foam Wet Filter
1. Verify that the power cord is disconnected from the outlet. (Fig. 1)
2. Remove power head and place in upside down position. Follow instructions to remove
cartridge lter.
3. Carefully slide foam wet lter down over the lter cage making sure the cage is completely
covered. (Fig. 2 & 3)
4. Place the power head onto the collection tank.
Cleaning Foam Wet Filter
1. With the removed power head in an upside down position, carefully remove foam wet lter. (Fig.
4)
2. Use a mild soap and water solution to wash foam wet lter and rinse with clean water. (Fig. 5)
3. Allow lter to air dry before installing and using again.
INSTALLING & CLEANING FOAM WET FILTER
1 2 3 4
5
Loading ...
Loading ...