Loading ...
Loading ...
Loading ...
Before rst use and every use
Disassemble all parts and clean them
in warm soapy water and rinse them
thoroughly. Sterilize the parts in boiling
water for 5 minutes or by using a Philips
Avent sterilizer. This is to ensure hygiene.
During sterilizing in boiling water, make
sure that the pan contains enough water
and prevent the bottle or other parts from
touching the side of the pan. This can cause
irreversible product deformation, defect or
damage that Philips cannot be held liable
for. Make sure that you wash your hands
thoroughly and that the surfaces are clean
before contact with sterilized parts. Place
all bottle parts on a clean paper towel or on
a clean drying rack and allow them to air dry.
Excessive concentration of detergents
may eventually cause plastic components
to crack. Should this occur, replace
immediately.
This product is dishwasher safe - food
colourings may discolour parts.
Clean and sterilize all parts before each use.
For hygiene reasons, we recommend
replacing nipples after 3 months.
Assembly
When you assemble the bottle, make sure
you place the cap vertically onto the bottle
so that the nipple sits upright (see image for
more details).
The nipple is easier to assemble if you
wriggle it upwards instead of pulling it up in
a straight line.
Maintenance nipple and AirFree™ vent insert
Do not leave a feeding nipple and/or
AirFree™ vent insert in direct sunlight or
heat, or leave in disinfectant (‘sterilizing
solution’) for longer than recommended,
as this may weaken the parts.
Keep parts in dry, covered container.
Choosing the right nipple for your baby
The Philips Avent nipples are separately
available with dierent ow rates to help
your baby with drinking. Over time you
can change the nipple accommodating
the individual needs of your baby. Philips
Avent nipples are clearly numbered on the
side to indicate ow rate (see image). Make
sure you use a nipple with the correct ow
rate when you feed your baby. Use a lower
ow rate if your baby chokes, is leaking
milk or has trouble adjusting to the drinking
speed. Use a higher ow rate if your baby
falls asleep during feeding, gets frustrated
or when feeding takes a very long time.
These Philips Avent nipples can be used on
the Philips Avent feeding bottle and Philips
Avent storage cups.
(1) The nipple for 0m+ is ideal for newborn
and breastfed babies of all ages.
The number 1 is shown on the nipple.
(2) The nipple for 1m+ is ideal for breastfed
babies of all ages. The number 2 is shown
on the nipple.
(3) The nipple for 3m+ is ideal for bottle
fed babies at 3 months of age and up.
The number 3 is shown on the nipple.
(4) The nipple for 6m+ is ideal for bottle
fed babies at 6 months of age and up.
The number 4 is shown on the nipple.
(I/II/III) Variable ow: has a bite resistant
silicone nipple. The sturdier nipple, with an
adjustable ow rate to baby’s convenience
is ideal for bottle fed babies at 3 months of
age and up. The nipple has one slot cut on
the top for uid and the markings I, II, III on
the edges of the nipple.
(Y) The thick feed nipple designed for thicker
feeds is ideal for bottle fed babies at 6 month
s
of age and up. The nipple has one Y cut for
uid and the symbol Y on the nipple.
Note: Every baby is unique and your
baby‘s individual needs may vary from the
description of ow rates.
Loading ...
Loading ...
Loading ...