Loading ...
Loading ...
Loading ...
5.
Remove the rear axle shaft, washer B,
brake caliper bracket, side collars and rear
wheel.
u Support the brake caliper assembly so
that it doesn’t hang from the brake
hose. Do not twist the brake hose.
u Avoid getting grease, oil, or dirt on the
disc or pad surfaces.
u Do not push the brake pedal while the
brake caliper is removed.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
NOTICE
When installing a wheel or caliper into original
position, carefully fit the brake disc between the
pads to avoid scratching them.
2.
Make sure that the lug on the brake
caliper bracket is positioned in the slot on
the swingarm.
20170925135210_31K75A200_enu_BOOK Page 97 Monday, September 25 2017 13:58:25 JST
Tire Puncture u Removing Wheels
Troubleshooting
94
Brake caliper bracket
Lug
Slot
Swingarm
Loading ...
Loading ...
Loading ...