Loading ...
Loading ...
Loading ...
8.
Install the new oil filter with the OUT-SIDE
mark facing out.
9.
Install the oil filter spring into the oil filter
cover, and then install the new gasket and
oil filter cover by tightening the oil filter
cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m)
10.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m)
11.
Fill the crankcase with the recommended oil
(2 P. 43, 2 P. 127) and install the oil fill cap.
Required oil
When changing oil & engine oil filter:
1.6 US qt (1.5 L)
When changing oil only:
1.5 US qt (1.4 L)
12.
Check the oil level. 2 P. 62
13.
Check that there are no oil leaks.
14.
Install the right under cowl and right
middle cowl.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
20170925135210_31K75A200_enu_BOOK Page 68 Monday, September 25 2017 13:58:25 JST
Engine Oil u Changing Engine Oil & Filter
Maintenance
65
Oil filter cover
Spring
OUT-SIDE mark
Gasket
Oil filter cover bolts
Oil filter
Loading ...
Loading ...
Loading ...