Loading ...
Loading ...
Loading ...
Basic Operation & Riding
53
Shifting Gears
2.
With the throttle closed while the engine is idling, pull in the
clutch lever and depress the shift lever to shift into 1st gear.
3.
Release the rear brake pedal, gradually release the clutch lever,
and increase engine speed by gradually opening the throttle.
4.
When the speed increases, close the throttle, pull in the clutch
lever, shift to 2nd gear by raising the shift lever, and gradually
release the clutch lever while gradually opening the throttle.
5.
Repeat this sequence to progressively upshift to 3rd, 4th and 5th
(top) gear.
6.
To downshift, reverse this sequence. Remember to close the
throttle each time you shift to the next lower gear.
Learning when to shift gears comes with experience. Keep the
following tips in mind:
• As a general rule, shift while moving in a straight line.
• Close the throttle and pull the clutch lever in completely before
shifting. Improper shifting may damage the engine, transmission,
and drive train.
• Upshift to a higher gear or reduce throttle before engine rpm
(speed) gets too high. Learn the relationship between engine
sound and the normal shifting points.
• Downshift to a lower gear before you feel the engine laboring
(lugging) at low rpm.
• Avoid downshifting to help slow your ATV when engine rpm is
high. Downshifting when engine speed is near its allowable
maximum may over-rev the engine and possibly cause damage.
• To prevent transmission damage, do not coast or tow the ATV for
long distances with the engine off.
Recommended Shift Points
Ride in the highest gear that lets the engine run and accelerate
smoothly.
This will give you good fuel economy and effective emissions control.
13 TRX450ER-31HP16700.book 53 ページ ２０１２年７月２日 月曜日 午後６時３０分
Loading ...
Loading ...
Loading ...