Loading ...
Loading ...
Loading ...
Servicing Your Honda
94
Engine Oil & Filter
4.
Reinstall the oil filter cover, making sure the bolts are tightened
to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5.
Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 174).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
1.
Reinstall the oil drain bolt with the new sealing washer and
tighten it to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
2.
Fill the crankcase with the recommended grade oil
approximately:
0.73 US qt (0.69 ℓ)
3.
Reinstall the engine oil fill cap.
4.
Start the engine and let it idle for 3 – 5 minutes.
5.
Stop the engine, wait 2 – 3 minutes and check the engine oil
level. Make sure the engine oil level is at the upper level mark in
the inspection window with the ATV upright on firm, level
ground. If necessary, add more oil but do not overfill.
6.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
13 TRX450ER-31HP16700.book 94 ページ ２０１２年７月２日 月曜日 午後６時３０分
Loading ...
Loading ...
Loading ...