Loading ...
Loading ...
Loading ...
Servicing Your Honda
99
Transmission Oil
Add Transmission Oil:
5.
Reinstall the oil drain bolt with the new sealing washer and
tighten it to the specified torque:
16 lbf·ft (22 N·m , 2.2 kgf·m)
6.
Fill the crankcase with the recommended grade oil
approximately:
0.72 US qt (0.68 ℓ)
7.
Reinstall the transmission oil fill cap.
8.
Start the engine and let it idle for 3 – 5 minutes. Stop the engine,
wait 2 – 3 minutes to allow the oil to properly distribute itself in
the clutch and transmission. Check the transmission oil level by
following the steps in Checking & Adding Transmission Oil (see
page 97).
9.
Check that there are no oil leaks.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
13 TRX450ER-31HP16700.book 99 ページ ２０１２年７月２日 月曜日 午後６時３０分
Loading ...
Loading ...
Loading ...