Loading ...
Loading ...
6. How to unlock and lock the safe with PIN code
6.1 Unlock: Enter a registered PIN code and press the star button (*).
6.2 Lock: Press either the star button (*) or pound button (#).
7. How to unlock and lock the safe with a key
7.1 Insert key into the keyhole and rotate to the right (clockwise) to unlock, and back to the
starting/lock position to lock the safe.
8. How to turn sounds on/off
8.1 Turn sounds on: Press 1 and the star button (*). A long beep will sound.
8.2 Turn sounds off: Press 0 and the star button (*).
Mounting instructions
For extra security, the safe may be mounted to a wall or floor. Be aware of the load bearing.
Failure to do so can result in personal injury and/or damage to property. Use appropriate tools
when performing work and always use eye protection.
Wall Mounting
• Do not mount the safe to a wall without anchoring it properly
• Find the studs in the wall. Most studs are 16 inches or 24 inches apart.
• Check the wall for concealed wires or pipes
• Measure the location of the pre-set drill holes of the safe. Mark their exact position onto
the wall ensuring that the studs or anything else behind the wall will not interfere
• Drill the appropriate size holes for the anchors you are using
• Carefully press the anchors into the holes drilled into the wall
• Run screws from inside the safe into the anchors in the wall. Make sure that the safe
is mounted securely.
Floor Mounting
• Use the proper tools depending on the type of floor you are drilling (wood, tile, concrete, etc.)
• Measure the location of the pre-set drill holes of the safe. Mark their exact position onto
the floor.
• Drill the appropriate size holes for the anchors you are using
• Carefully press the anchors into the holes drilled into the floor
• Run screws from inside the safe into the anchors in the floor. Make sure that the safe is
mounted securely.
Care and Maintenance
• To maximize the security and performance of the safe, keep the glass fingerprint scanner
surface dry and clean
• Use a dry cloth to remove any smudges or prints from the scanner after use
• Use gentle cleaning agents to clean the safe and scanner
• Test registered fingerprints and PIN code every 6 months
• Keep liquids away from the control panel. Spills on the control panel will cause damage
and possibly electric shock.
• Secure safe in a proper area to prevent it from failing and causing damage or injury
3
Loading ...