Loading ...
Loading ...
Loading ...
SB-F-EXPED2/10W3v3_INSTR_SKU#011237
SB-F-EXPED2/10W3v3_INSTR_SKU#011237
CONGRATULATIONS
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
STEP 38
Replace the floor storage bins back into the SUV. Secure
them to the floor, from STEP 4.
Replace the tailgate’s lower sill plate back into the SUV,
from STEP 3.
Replace the storage covers back into the SUV,
from STEPS 1 & 2.
STEP 37
Secure the lift tray to the floor, from STEP 5.
STEP 36
Secure the third row seat belt to the ceiling and floor,
from STEPS 8 & 9.
Snap in the seat belt trim panel, from STEP 7.
Replace the d-pillar cover, from STEP 16.
Replace the tailgate’s upper sill plate, from STEP 15.
Replace the driver’s rear door sill plate, from STEP 14.
Page 6 • JL Audio, Inc 2007
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU#011237-08-08-200
JLA-SKU#011237-08-08-200
7
7 • Printed in USA • ©2007 JL Audio, Inc. • U.S. PATENTS: #5,734,734 #5,949,898 #6,118,884 #6,229,902
#6,243,479 #6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign
patents pending. For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
www.jlaudio.com
10369 NORTH COMMERCE PARKWAY • MIRAMAR, FLORIDA • 33025 • USA
INCLUDED HARDWARE
(3)
(3)
3/8-inch -16 x 1-inch Hex Tap Bolt
3/8-inch -16 x 1-inch Hex Tap Bolt
(4)
(4)
3/8-inch Flat Washer
3/8-inch Flat Washer
(1)
(1)
L-bracket
L-bracket
(4)
(4)
#8 SAE Flat Washer
#8 SAE Flat Washer
(1)
(1)
Z-bracket
Z-bracket
(4)
(4)
#8-32 x 1/2-inch Pan Head Screw
#8-32 x 1/2-inch Pan Head Screw
(3)
(3)
3/8-inch Split lock Washer
3/8-inch Split lock Washer
(1)
(1)
5/8-inch MDF Square Grille
5/8-inch MDF Square Grille
SPECIFICATIONS
Enclosure Type:
Acoustic Suspension (sealed)
Acoustic Suspension (sealed)
Driver Type:
10W3v3
10W3v3
Nominal Impedance:
4 ohms mono
4 ohms mono
Continuous Power Handling:
300 Watts
300 Watts
P O W E R R E C O M M E N D A T I O N
POWER RECOMMENDATION
JL Audio recommends using a high quality amplifier such as the JL Audio 250/1v2.
The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 250/1v2
when being used to power your Stealthbox
®
.
The JL Audio 250/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
MID/HIGH FREQUENCY DRIVER FITMENT
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location:
5-inch x 7-inch / Front Doors
5-inch x 7-inch / Front Doors
Fits JL Audio Models:
TR570-CXi, XR570-CXi, XR570-CSi, C5-570x, C5-570, ZR570-CSi
TR570-CXi, XR570-CXi, XR570-CSi, C5-570x, C5-570, ZR570-CSi
Rear Speaker Size / Location:
5-inch x 7-inch / Rear Door
5-inch x 7-inch / Rear Door
Fits JL Audio Models:
TR570-CXi, XR570-CXi, XR570-CSi, C5-570x, C5-570, ZR570-CSi
TR570-CXi, XR570-CXi, XR570-CSi, C5-570x, C5-570, ZR570-CSi