Loading ...
Loading ...
Loading ...
Remote Level Control
The remote level control gives you the ability to control
the level remotely. You may install the level control by the
driver for easy adjustments on the fly. The Wet Sounds
remote level control is not a bass boost control. Or a
remote gain. It is a remote level control. Meaning if the
amplifiers gain is set at half. The remote level allows you
to turn the amplifier up remotely from zero to half. If the
amp is set at ¼. The remote level will go from zero to ¼.
This allows the system to be set at the best sounding
level and just use the remote to turn it down when
needed. This is a safety feature that also keeps people
from turning your system up too high and damaging
equipment
Fuses
Each Sinister amp has Four 30 amp fuses. The Sinister amplifiers are one
of the most efficient amplifiers in the world. However, the laws of physics
apply and you need power to make power and the Sinister amps make a
LOT of power. If you blow a fuse. Check your wiring for shorts and why the
fuse is blowing. Also, check the speakers and speaker wiring as well. You
should trouble shoot the system before replacing fuses.
RCA Input
The Sinister amplifiers have fully balanced RCA inputs for the best sound
quality and lowest noise. They are labeled for easy installation and being
a universal amplifier. Any channel can serve any purpose. High Pass/Low
Pass/Full Range. Also, please note. Bass Boost is available on chs 1-2.
So if using a subwoofer and you would like to use Bass Boost. The
subwoofer will be on chs 1-2. Bass Boost can be passed to the other
channels if you are using the input source selection switch.
8 FEATURES
9
REMOTE
LEVEL
FUSE 30 AMP X 4
SD2 SD4 SD6
Loading ...
Loading ...
Loading ...