Loading ...
Loading ...
Loading ...
Maxed Power Supply
Wet Sounds Sinister amplifiers use a unique patent pending transformer
design we call MAXED that is the first of its kind in the mobile/marine
audio market. Making the Sinister amplifiers one of the most efficient
amplifiers ever built. Wet Sounds took it a step farther by through
bolting the transformer to the heat sink and not just the pcb, resulting in
a heat sink that dissipates heat from the output side as well as the
transformer. This advanced construction method also results in a more
robust build method for the rugged marine market.
Thermal Rollback Technology
Wet Sounds thermal rollback circuit monitors the Sinister
TM
amplifiers
temperature and adjusts the amplifiers output. The Sinister amplifiers
are extremely efficient. However, marine use is the most demanding
application of a 12 volt amplifier. There are times when extended
listening combined with high ambient temperatures and a tight mounting
can make even the most efficient amplifier work overtime. We designed
the thermal rollback circuit to be automatic and seamless. The amplifier
will roll its peak power output so it can lower its operating temperature.
What this means for you is more play time and not having your amplifier
go into thermal protection right when they party is going great.
Advanced Intelligent Microprocessor Control
Think of it as a tiny supercomputer constantly monitoring everything and
protecting itself from harm. The Microprocessor will put the amplifier into
protection if it senses an over voltage situation or a under voltage
situation or DC offset. If you damage a speaker or have a shorted wire.
The amplifier will also put itself into protection. And if you go past the
thermal rollback circuit, the amplifier has a second level of protection
from heat and will shut itself down.
Top mounted crossover controls
Wet Sounds designed the Sinister amplifier from the ground up as a true
marine amplifier. Marine amplifiers are mounted to amp panels in a
boat. Making it harder to access the controls. The sinister amplifiers
have all the controls on the top for easy access and adjustments once
the amplifier is mounted.
4 FEATURES
5
Four Layer PCB
Massive Four layer PCB. The Sinister amplifier uses a four layer PCB to
make a solid mounting platform and robust design for the power they
can produce and the rugged environment.
Remote Level Control
Remote Level control gives you the ability to control Channels 1-2 on
each amplifier. (SD2, SD4 and SD6) With a pcb mounted switch, the
level control will control all channels (1-6 on the SD6 and 1-4 on the
SD4) Please contact Wet Sounds for information on how to access this
switch. This is useful if using a single amplifier to power multiple tower
speakers or multiple subwoofers.
Top mount back lit 3 way LED Badge Light: Red/White/Blue. Horizontal
or Vertical Placement
The Wet Sounds shield logo badge not only looks great but provides the
amplifier status through its acrylic spacer. Two screws hold the badge
onto the cover plate. With the option for horizontal or vertical placement.
This is perfect for those installations where you are not having to re wire
or change the wiring to get the amplifiers logo straight.
Fully Balanced Inputs
Fully Balanced inputs for better sound quality with less noise.
RCA Pass Through (SD2 and SD4)
The SD2 and SD4 provide an RCA pass through to link to another
amplifier. This means less wire and no RCA y Adapters.
Removable Speaker Plugs
Sinister use Wet Sounds exclusive marine compliant removable speaker
plugs designed for high power and larger GA wire. Making it easier to pre
wire the terminal and plug them into the amplifier after amplifier
mounting. Power and Ground are a solid connection as the Sinister
amplifiers are extremely high powered amplifiers so a non removable
connection is used.
Loading ...
Loading ...
Loading ...