Loading ...
Loading ...
Loading ...
Warning and Safety instructions
9
Never open the casing of the wok burner.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele authorised service technician.
Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.
The wok burner is not intended for use with an external timer
switch or a remote control system.
Connection to the gas supply must be carried out by a suitably
qualified and competent gas fitter. If the plug has been removed or
the connection cable is not supplied with a plug, the appliance must
be connected to the mains supply by a suitably qualified electrician.
If the mains connection cable is damaged, it must be replaced
with a special mains connection cable, available from Miele, by a
Miele authorised service technician or suitably qualified and
competent electrician in order to avoid a hazard (see “Installation -
Electrical connection”).
During installation, maintenance and repair work, the wok burner
must be completely disconnected from the mains electricity supply.
The gas supply must also be turned off. It is only completely isolated
from the gas and electricity supply when:
– the main circuit breaker has been disconnected, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
– the gas inlet valve is closed.
Loading ...
Loading ...
Loading ...